BYTC15 Extra Fast Clear Coat.
BYTC15 Extra Fast Clear Coat.
Auto Coatings
Product Name/Model：BYTC15 Extra Fast Clear Coat.
Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, lowconsumption and high efficiency to ensure good profit, suitable for fast spots repair.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
＜25℃ |
BYTC15 Extra FastDrying Clear Coat |
BYTC150 Extra FastDry Hardener |
BYTX-1 Fast Thinner |
||
|
SprayViscosity |
14-16s to drop off, in 4#viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25°C, 1.5 hour. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C,5-10 minutesbetween two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dryto Handle |
Dry toTest |
|
25°C |
15 minutes |
2 hours |
4 hours |
5 days |
|
|
70°C |
3 minutes |
10 minutes |
15 minutes |
45 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. This products are extra fast reaction, after mixing clear coat with hardener, just add smallquantity of thinner for spraying, the mixture should be used up within 1 hour.2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.3. This product is suitable for spots repairs, not suitable for overall repair.4. At temperature lower than 8°C, a forced dry by baking is recommended.5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lowerthan 80%, otherwise there will be defects such as blisteringorblushing.6. The products mixed with hardener should be used up soon and can not be restore for futureuse; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BYTF600-Plastic Primer | Auto Coatings Product Name/Model：BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
 |
BM2K Solid Colors | BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good... |
 |
BM2K Solid Colors | BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good... |
 |
BM1K Solid Colors (Basecoat Colors) | BM1K Solid Colors (Basecoat Colors) Auto Coatings Manufacturers Product Name/Model：BM1K Solid Colors (Basecoat Colors) Characteristic:BM1K Sol... |
Похожие товары
 |
Benzoic acid | Продавец: JIANGSU SHUNFENG CHEMICAL CO.,LTD. | Classification:BoatPaintCasNO.:65-85-0MolecularFormula:C7H6O2MeltingPoint:121-123℃BoilingPoint:24... |
|
|
BYTC15 Extra Fast Clear Coat. | Продавец: Guangzhou Zhenroumei Chemical Coatings Limited | BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model：BYTC15 Extra Fast Clear Coat. Cha... |
