BYTC15 Extra Fast Clear Coat.
BYTC15 Extra Fast Clear Coat.
Auto Coatings
Product Name/Model：BYTC15 Extra Fast Clear Coat.
Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, lowconsumption and high efficiency to ensure good profit, suitable for fast spots repair.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
＜25℃ |
BYTC15 Extra FastDrying Clear Coat |
BYTC150 Extra FastDry Hardener |
BYTX-1 Fast Thinner |
||
|
SprayViscosity |
14-16s to drop off, in 4#viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25°C, 1.5 hour. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C,5-10 minutesbetween two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dryto Handle |
Dry toTest |
|
25°C |
15 minutes |
2 hours |
4 hours |
5 days |
|
|
70°C |
3 minutes |
10 minutes |
15 minutes |
45 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. This products are extra fast reaction, after mixing clear coat with hardener, just add smallquantity of thinner for spraying, the mixture should be used up within 1 hour.2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.3. This product is suitable for spots repairs, not suitable for overall repair.4. At temperature lower than 8°C, a forced dry by baking is recommended.5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lowerthan 80%, otherwise there will be defects such as blisteringorblushing.6. The products mixed with hardener should be used up soon and can not be restore for futureuse; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Send product request
Other supplier products
 |
BC1K Solid Colors (Basecoat Colors) | BC1K Solid Colors (Basecoat Colors) Automotive Paints Supplier Product Name/Model:BC1K Solid Colors(Basecoat Colors) Characteristic:BC1K Solid Col... |
 |
F400-1K Primer Surfacer | Auto Coatings Product Name/Model：F400-1K Primer Surfacer Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, e... |
 |
Clear Coat Series | Clear Coat Series Automotive Paints Supplier Product Name/Model:Clear CoatSeries Characteristic:1.MSK-8000Clear Coat:Two- component 880 clear ... |
 |
MF910-Degreaser | 17、MF910-Degreaser Refinish Automotive Paint Product Name/Model:MF910-Degreaser Characteristic:Able to remove greaser, oil and other surface conta... |
 |
BM2K Solid Colors | BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good... |
Same products
 |
Benzoic acid | Seller: JIANGSU SHUNFENG CHEMICAL CO.,LTD. | Classification:BoatPaintCasNO.:65-85-0MolecularFormula:C7H6O2MeltingPoint:121-123℃BoilingPoint:24... |
|
|
BYTC15 Extra Fast Clear Coat. | Seller: Guangzhou Zhenroumei Chemical Coatings Limited | BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model：BYTC15 Extra Fast Clear Coat. Cha... |
