High temperature creep endurance testing machine
Product Introduction:
The high temperature creep endurance testing machine is mainly used for testing the mechanical properties of superalloys, titanium alloys, other ferrous metals and non-ferrous metals. It can test the tensile creep, durability and stress relaxation properties of metal materials at high temperature or room temperature. Low cycle fatigue and creep fatigue tests can also be done.
Applicable standards:
GB/T2039 "Test method for tensile creep and Durability of metals"
GB/T10120 "Metal Stress relaxation test method"
HB 5151 "Metal tensile creep test Method at High Temperature"
HB 5150 "Metal High temperature tensile Durability test Method"
Technical indicators:
1. Electronic type
- Maximum load: 30KN, 50KN, 100KN, 200KN
- Test force measurement range: 1% - 100%FS
- Test force resolution: 1/500000(full resolution unchanged)
- Constant force control error: ±0.5%
- Maximum deformation: 0-10mm, 0-15mm, 0-20mm optional
- Effective deformation range: 0.1-100%FS
- Deformation resolution: 0.1μm
- Deformation absolute error: 2μm
- Constant deformation control error: ±0.001μm
- Test speed range: 0.11-100mm/min
- Relative error: ±0.5%
- Maximum stretch: 200mm
- Temperature range: 200-1200℃
- Temperature fluctuation: ±2℃
- Uniform tropical length: 150 or 200mm
- Temperature gradient: 3℃
2. Mechanical
- Maximum load: 30KN, 50KN, 100KN
- Test force measurement range: 1% - 100%FS
- Relative error: ±0.5%
- Minimum weight: 1N
- Deformation measuring range: 0-10mm, 0-15mm, 0-20mm optional
- Deformation resolution: 0.001mm or 0.0001mm
- Extensometer range: 25. 50. 100 optional
- Deformation error: 0-10/±0.002. 10-20/±0.003. 20-50/±0.004
- Deformation 7000 hours stability: ±0.2%
- Operating temperature range: 200-1200℃
- Uniform tropical length: 150 or 200mm
- Temperature fluctuation: ±2℃
- Temperature gradient: 3℃
High-temperature furnace life at -1200 ℃ : Φ1.5 furnace wire for 5000H, Φ5 furnace wire for 5000H
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Wires Flammability Tester | Standards FMVSS 302(Federal Motor Vehicle Safety Standard) ISO 6722(Road Vehicle Cable Flammability) UL 94(Tests for Flammability of Plastic Mat... |
 |
Micron Tester- | Compliant Standards - GB 1103-2007: China's national standard for cotton micronaire value determination. - ASTM D1448: International standard for... |
 |
IBC cleaning systems,ibc cleaning equipment,high pressure ibc washer | Model Semi-automatic IBC tote washer Spray angle 360° Material stainless steel Max. Pressure 150 bar Voltage 380V (or on request) Voltage of IB... |
 |
Flame retardant paper and board burning tester | Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ... |
 |
Pumpability tester | Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
