High temperature creep endurance testing machine
Product Introduction:
The high temperature creep endurance testing machine is mainly used for testing the mechanical properties of superalloys, titanium alloys, other ferrous metals and non-ferrous metals. It can test the tensile creep, durability and stress relaxation properties of metal materials at high temperature or room temperature. Low cycle fatigue and creep fatigue tests can also be done.
Applicable standards:
GB/T2039 "Test method for tensile creep and Durability of metals"
GB/T10120 "Metal Stress relaxation test method"
HB 5151 "Metal tensile creep test Method at High Temperature"
HB 5150 "Metal High temperature tensile Durability test Method"
Technical indicators:
1. Electronic type
- Maximum load: 30KN, 50KN, 100KN, 200KN
- Test force measurement range: 1% - 100%FS
- Test force resolution: 1/500000(full resolution unchanged)
- Constant force control error: ±0.5%
- Maximum deformation: 0-10mm, 0-15mm, 0-20mm optional
- Effective deformation range: 0.1-100%FS
- Deformation resolution: 0.1μm
- Deformation absolute error: 2μm
- Constant deformation control error: ±0.001μm
- Test speed range: 0.11-100mm/min
- Relative error: ±0.5%
- Maximum stretch: 200mm
- Temperature range: 200-1200℃
- Temperature fluctuation: ±2℃
- Uniform tropical length: 150 or 200mm
- Temperature gradient: 3℃
2. Mechanical
- Maximum load: 30KN, 50KN, 100KN
- Test force measurement range: 1% - 100%FS
- Relative error: ±0.5%
- Minimum weight: 1N
- Deformation measuring range: 0-10mm, 0-15mm, 0-20mm optional
- Deformation resolution: 0.001mm or 0.0001mm
- Extensometer range: 25. 50. 100 optional
- Deformation error: 0-10/±0.002. 10-20/±0.003. 20-50/±0.004
- Deformation 7000 hours stability: ±0.2%
- Operating temperature range: 200-1200℃
- Uniform tropical length: 150 or 200mm
- Temperature fluctuation: ±2℃
- Temperature gradient: 3℃
High-temperature furnace life at -1200 ℃ : Φ1.5 furnace wire for 5000H, Φ5 furnace wire for 5000H
Send product request
Other supplier products
 |
Wire Bending Test Machine | Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
 |
Universal Wear Tester(UWT)/Stoll Quartermaster | Application: Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industr... |
 |
Washer and Dryer | Product Overview The Washer-Dryer Combo is a space-saving solution for automated laundry processing, combining washing and drying functions in a s... |
 |
Carbon black content measuring machine | Scope of application: Used to determine the carbon black content of rubber, polyolefin plastics, polyolefin pipes and fittings, and raw materials ... |
 |
STD 500 ultra-high pressure 3D tank cleaning heads | STD 500 ultra-high pressure 3D tank cleaning heads This STD 500 is designed to remove the toughest residues from large tanks in numerous industrie... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
