High temperature creep endurance testing machine
Product Introduction:
The high temperature creep endurance testing machine is mainly used for testing the mechanical properties of superalloys, titanium alloys, other ferrous metals and non-ferrous metals. It can test the tensile creep, durability and stress relaxation properties of metal materials at high temperature or room temperature. Low cycle fatigue and creep fatigue tests can also be done.
Applicable standards:
GB/T2039 "Test method for tensile creep and Durability of metals"
GB/T10120 "Metal Stress relaxation test method"
HB 5151 "Metal tensile creep test Method at High Temperature"
HB 5150 "Metal High temperature tensile Durability test Method"
Technical indicators:
1. Electronic type
- Maximum load: 30KN, 50KN, 100KN, 200KN
- Test force measurement range: 1% - 100%FS
- Test force resolution: 1/500000(full resolution unchanged)
- Constant force control error: ±0.5%
- Maximum deformation: 0-10mm, 0-15mm, 0-20mm optional
- Effective deformation range: 0.1-100%FS
- Deformation resolution: 0.1μm
- Deformation absolute error: 2μm
- Constant deformation control error: ±0.001μm
- Test speed range: 0.11-100mm/min
- Relative error: ±0.5%
- Maximum stretch: 200mm
- Temperature range: 200-1200℃
- Temperature fluctuation: ±2℃
- Uniform tropical length: 150 or 200mm
- Temperature gradient: 3℃
2. Mechanical
- Maximum load: 30KN, 50KN, 100KN
- Test force measurement range: 1% - 100%FS
- Relative error: ±0.5%
- Minimum weight: 1N
- Deformation measuring range: 0-10mm, 0-15mm, 0-20mm optional
- Deformation resolution: 0.001mm or 0.0001mm
- Extensometer range: 25. 50. 100 optional
- Deformation error: 0-10/±0.002. 10-20/±0.003. 20-50/±0.004
- Deformation 7000 hours stability: ±0.2%
- Operating temperature range: 200-1200℃
- Uniform tropical length: 150 or 200mm
- Temperature fluctuation: ±2℃
- Temperature gradient: 3℃
High-temperature furnace life at -1200 ℃ : Φ1.5 furnace wire for 5000H, Φ5 furnace wire for 5000H
在线联系供应商
Other supplier products
 |
Barrel handling equipment | Barrel Clamps ModelDescriptionRated Load DTC Dual-Barrel Clamp 720 kg STC Single-Barrel Clamp 360 kg STD12 Transfer... |
 |
Textile water evaporation rate tester | Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana... |
 |
Digital Auto Burst Strength Tester-QINSUN | Digital Auto Burst Strength Tester Standards ASTM D3786. ERT 80-4-20. GB/T 7742.1. BS EN ISO 13938-1. BS 3424-6-B, ISO 3303-B, ISO 2758. ISO 3303... |
 |
SDC Fading Grey Scale | Applicable Standards The SDC Grey Scale adheres to international colorfastness testing protocols, including: ISO 105-A02(Grey Scale for Asses... |
 |
Rain Tester | Standard AATCC 35: Water Resistance: Rain Test for Fabrics BS EN ISO 22958: Textiles – Determination of Resistance to Water Penetration &nd... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
