Hydraulic filter performance tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

NAS 1638 : Cleanliness Requirements for Hydraulic Fluids

ISO 4406: 2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles

GJB 420A-2006 : Classification of Solid Particle Contamination in Hydraulic Systems and Components

GB/T 14039-2002 – Hydraulic Transmission: Oil contamination control and monitoring

GB/T 18854-2015 – Hydraulic Transmission: Determination of solid particle contamination levels

Features

1. Employs strong magnetic filter material for efficient adsorption and removal of metallic impurities such as iron filings;

2. Equipped with original imported polymer materials for thorough demulsification;

3. Combines coalescence separation technology with vacuum duplex three-dimensional flash evaporation process to significantly improve dehydration and degassing efficiency and thoroughness;

4. Utilizes internationally advanced multi-U-shaped gradually denser carbon fiber far-infrared heaters for uniform heating, high efficiency, and energy saving;

5. The entire filtration process is purely physical, without damaging the original properties of the oil or various additives; Strong wind cooling technology accelerates water vapor condensation and sedimentation, effectively protecting the stable operation of the vacuum pump.

Technical Parameters

Technical Parameters	Specifications
Working Pressure	0.6MPa
Differential Pressure for Alarm	0.2MPa
Flow Rate	50±5L/min
Medium	≤160mm/s (20℃)
Accuracy	5μm
Rated Power	2.2KW
Power Supply Voltage	3-phase 380V
Frequency	50Hz
Operating temperature	20℃ - 70℃

Accessoriess

1. Core Functional Components:

Dedicated gear pump (low noise, self-priming)

Multi-stage filtration system (including coarse filter and replaceable fine filter cartridges of different precision)

High-pressure pipeline and overflow protection device

Pressure gauge and differential pressure transmitter (for real-time monitoring of system pressure and filter cartridge contamination level)

2. Electrical and Control Components:

Control panel (including buttons and display screen)

Three-phase 380V power adapter

2.2KW rated power drive motor

3. Consumable Components:

Filter cartridges of different precision (matching 5μm and other precision requirements)

Seals (such as O-rings, pipeline gaskets, for leak prevention)

Sampling-related components (such as sampling bottles, pipeline connectors; some equipment comes with high-cleanliness sampling tools)

4. Auxiliary Components:

Casts (easy-to-move parts on the bottom of the equipment)

Instruction manual, certificate of conformity, and other documentation

Test Procedures

When the oil filter works for a period of time, the oil filter oil system pressure increases accordingly, the performance of its components have different effects, especially on the filter precision of the filter element of the shadow

core damage, the main reason for this is that the filter element of the differential pressure rises, the need to replace the filter element. Specific cleaning and replacement methods are as follows:

Cleaning: (only on the pump before the suction oil filter)

Cleaning cycle: oil filter continuous work for a week (about 150 hours)

a. Unscrew the top cover of the oil suction filter and take out the filter element.

b.Cleaning the filter element:When cleaning the filter element, soak it with gasoline for about half an hour and then remove the impurities with a brush.

Replacement

Conditions for replacement: When the oil filter is filtering, when the red indicator pops up on the differential pressure alarm installed on the pre-filter and fine filter, the cartridge needs to be

Replacement method: loosen the four bolts on the upper cover of the pre-filter and fine filter, remove the upper cover, take out and replace the filter element.

Precautions

The oil filter can not filter gasoline and other flammable liquids.

If the oil pool (or tank) of the oil is too dirty and there may be large obstacles, in the suction port should be installed on the large mesh filter protection.

The oil suction and discharge pipes should be kept clean.

Другие товары поставщика

	Helmet Projection and Surface Friction tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose The Shear Force and Friction Tester for Helmet Surface Protrusions is mainly used ...
	High-frequency SRV tribometer for materials	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Lubricant Friction and Wear Evaluation Measurement of friction coefficient, w...
	Filter Dynamic Cycling Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Mainly used for performance testing of filter elements (such as hydraulic oil...
	Bone Cement Four-Point Bending Fatigue Tester	Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ...
	Battery Electrode Resistance Tester	Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ...

Все товары поставщика

Похожие товары

	Automated Filter Integrity Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Memb...
	High Efficiency Oil Water Separation Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO/TS 16332-2006 – Meth...
	DIN 51524 hydraulic oil analyzer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this unit in c...
	Cartridge filter pore size distribution tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 2942:2004 — Hydrauli...
	Cartridge Dynamic Cycle Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ISO 23840 — Hydrauli...