Fully Automatic Closed Mouth Flash Point Tester

• 

Meet the standard:

ASTM D93

ISO 2719

IP 34

ASTM D7236

Product Introduction:

The flash point is a critical parameter for classifying flammable and combustible liquids, essential for safety regulations related to transportation, storage, and handling. The closed-cup method, such as the Pensky-Martens method, is widely used for fuels (like diesel, kerosene), lubricating oils, solvents, and other liquids with varying viscosities.

In a fully automatic closed-cup flash point tester, a sample of the liquid is placed into a test cup, which is sealed with a lid except for a shutter that can be opened to introduce the ignition source. The instrument's heating system raises the sample temperature at a precise, controlled rate as specified by the relevant standard. A stirring mechanism may operate throughout the test to ensure uniform temperature distribution. At predetermined temperature intervals, the automatic system opens the shutter, introduces a small flame or electric igniter into the cup, and then closes the shutter. A sensor (thermal, ionization, or optical) monitors the vapor space for a flash (a brief ignition). The temperature at which a flash is detected is recorded as the flash point. The test is complete when a flash is detected or the maximum test temperature is reached. Fully automatic testers perform all these steps autonomously and can often cool down quickly between tests for high throughput.

The instrument is used in laboratories for:

Safety classification of flammable and combustible liquids.

Quality control of petroleum products, solvents, and chemicals to ensure they meet flash point specifications.

Receiving and shipping inspection of bulk liquids.

Research and development of new liquid formulations.

Compliance testing with national and international safety standards.

Product Advantages:

Fully automatic operation reduces operator labor, minimizes human error, and improves test repeatability.

Complies with key international standards for closed-cup flash point testing (ASTM D93. ISO 2719).

Provides accurate and reliable determination of flash point, a critical safety parameter.

Enhanced safety features protect the operator when testing flammable materials.

Increased sample throughput compared to manual or semi-automatic testers.

Digital display and data management capabilities for easy recording and reporting of results.

Другие товары поставщика

	Dry and Wet Retroreflectometer	Introduction： A retroreflectometer is a device used to measure how well a surface reflects light back to its source. This is really important for ...
	Shoe heat insulation testing machine -- sand bath	Shoe heat insulation testing machine -- sand bath - Other test instrument - standard Product Information: Main uses: Evaluate the insulation per...
	Fully Automatic Continuous Flow Reaction Calorimeter	Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it can quickly obtain the reaction heat release a...
	Mask Leakage Tester	Applications: The Mask Integrity Test Accessory (MITA) works in tandem with the CBRN Mask Protection Assessment Test System or PortaCount? Respi...
	Zipper Comprehensive Strength Testing Machine	Meet the standard: ASTM D2061 ASTM D2060 BS 3084 JIS S3015 DIN 3419 Product Introduction: The mechanical strength of a zipper's components i...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...