Thermal Radiation Dripping Test Machine, NF P92-501
This machine can be used for more than 5mm thickness of rigid and elastic material performance evaluation, and it is developed according to flame test standard NF P92-501. The tester to provide 30KW / m2 heat radiation, which may lead to volatile flammable gas sample and triggered the combustion of volatile gases, and at the same time to observe the state of the flame spread through the material and estimate combustion heat release data. Suitable for railway vehicle test radiation test methods of fire resistance material
Standard:NF P92-501
Model:STD-NFP92-501
Main feature:
1. Stainless steel test cabinet, the inner wall is flame resistant material with transparent viewing window
2. Stainless steel tubular inlet device, equipped with filtration devices shield for indoor sources
3. 45° of the test stand, equipped with stainless steel foot instructions to calculate the distance of flame spread
4. Heat radiation device can provide 30KW / m2 heat flux
5. The power controller controlling the radiation output, adjustable heat radiation;
6. The heat radiating panel display device operating power value, eliminating frequent calibration procedure
7. The stainless steel burner can ignite the combustible gas automatically.
8. The imported needle valve can control the upper and lower burner flame height, with a flame height measuring
9. Lasting small flame device is beignatedbefore the test to convenient upper and lower ignition burners
10. One-quarter rotation stopper device to facilitate cutting the gas burner and ignite the flame
11. The top and the air inlet temperature thermocouple monitoring, real-time status display temperature difference value
12. The test software can automatically analysis index of flame and burning heat index
13. Test reports and data can be exported and printed, system has friendly user interface
14. The test data as follows: raw flame index:i-flame average height index: S- longest flame index: h-combustion heat index: C
Technical Parameters:
1. Width: 1900mm (74.8 inches)*Depth: 460mm (18.1 inches)* height: 2100mm (82.6 inches)
2. Shipping Weight: 208Kg (Host: 158Kg; Tables: 50Kg)
3. Radiators rated power: 500W
4. The power meter accuracy: 0.5
5. The gas regulator valve pressure range: <0.1MPa
6. Power: 220V, 50Hz, 550W
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Cabin Air Filter Test System(Particle removal & Gas adsorption),ISO 11155 Cabin Air Filter Performance Test | Test System for both particle separation and gas absorption/desorption of of air filters for passenger compartments (DIN 71460-1/2. ISO 11155-1/2).... | |
| Fiber Blend Ratio Test machine | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... | |
| Wire Torsion Tester | Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part... | |
| UV Viewing Cabinet | The UV Viewing Cabinet is a precision instrument designed to detect and analyze fluorescent substances in a wide range of materials. By providing c... | |
| Appliance Stability Tester | Standards GB4706.1.GB/T 21547-2008.EN 60335 Product Advantages Fully conforms to critical international and national safety standards (GB 4706... |
Похожие товары
| Full-Body Garment Stress Tester,FZ/T 70015 | Продавец: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... | |
| Industrial Dry Cleaning Machine,industrial garment steamer | Продавец: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... | |
| MST Medical Compression Stocking Tester,compression sock tester | Продавец: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... | |
| MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Продавец: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... | |
| Dental material color stability tester | Продавец: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
















