High Velocity Impact Testing Machine

• 

Main Purpose

To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.

Applicable Standards

SNELL SA/K2010

EN 166. EN 168

ANSI Z87.1. MIL - PRF - 32432

ISO 4855

Technical Parameters

1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm

2. impact speed: 140~170m/s (adjustable);

3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);

4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;

5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;

6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;

7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;

8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.

Другие товары поставщика

	Carpet Pilling Formation Tester	Instrument Description This instrument is used to simulate the pilling and fuzzing phenomena that occur during the normal use of carpets. The inst...
	Dental Implants Static Torsion Tester	Standard ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data...
	Negative pressure tester for medical syringes	Main use 　　The negative pressure tester is mainly used to test the physical characteristics of the body of the syringe, and is one of the impor...
	Metal Bone Screws Torque Tester	Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ...
	Battery Slurry Resistance Tester	Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...