jmy501 hf 13.56mhz rfid reader and writer modules
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
Qualifications:
- PCD: NXP RC500, RC531, RC632, RC400
- Working frequency: 13.56MHz
- RF standard: ISO14443A, ISO14443B, ISO15693
- Operating distance: 100mm(depending on card and antenna design)
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default OFF
- EEPROM: 512Bytes
- Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps, UART--19200bps/115200bps
- Max.command length: 511 Bytes
- Interface level: 3.3V (TTL level; 5V tolerance)
- Power supply: DC5V
- Power consumption: 70mA
- Dimension: 42mm×21mm×8mm
- Package: DIP32
- Weight: about 15g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
• RoHS: Compliant
Send product request
Other supplier products
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
 |
RS232C interface HF RFID Reader/Writer Module JMY612 | JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactle... |
 |
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 | JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
 |
RS232C interface HF RFID Reader and writer Module JMY603 | JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless... |
 |
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 | JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
Same products
 |
Microcrystalline wax used for rubber plastic processing and modification | Seller: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Seller: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Seller: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Seller: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logis... |
 |
HVLS Ceiling Fan for Railway Station | Seller: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
