DSH-261 Pensky-Martens Closed Cup Flash Point Tester
A:Brief description:
DSH-261 Pensky-Martens Closed Cup Flash Point Tester is manufactured as per standards GB/T 261-2008 Determination of Flash Point(Pensky-martens Closed Cup) and ASTM D93.
DSH-261 Pensky-Martens Closed Cup Flash Point Tester is suitable to make determination of the closed cup flash point of the petroleum products which flash point over 40℃.
B:Main advantages:
1. This instrument is designed correspond with the requirements of GB/T261-2008.
2. The heating power is continuously and stepless adjustable. The power is shown visually by voltmeter. The temperature control mode is advanced and reasonable.
3. The structure is designed small and exquisite. The stainless-steel table board is beautiful and easy to clean.
4. Operation is easy. Test results are precise. It has been chosen as the instrument to test the closed cup flash point by many metering and detecting units.
C: Main technical specifications and parameters
1.Power supply：AC (220±10%)V, 50Hz.
2.Heating device:：The heating power is continuously adjustable from 0 W to 600W.
3.Rate of sample’s heating up:：(1～12)℃/min；Controllable and adjustable.
4.Electric stirring rate：(1)(90～120)turns/min,suitable to test procedure A.
(2)(250±10)turns/min,suitable to test procedure B.
5.Standard oil cup：(1)Inner diameter: 50.7mm～50.8mm.
(2)Depth: 55.7mm～56.0mm.
(3)The scribed line depth of capacity of testing oil: 33.9mm～34.3mm.
(4)Capacity of testing oil:about 70ml
6.Igniting device：(1)Igniting source: gas（or other civilian fuels，the same below）
(2)Bore diameter: 0.8mm
7.Thermometer：Mercurial thermometer, correspond with GB/T261-2008
(1)Scale -5℃～110℃, division 0.5℃。
(2)Scale 20℃～150℃, division 1℃。
(3)Scale 90℃～370℃,division 2℃。
8.Ambient temperature：≤ 35℃
9.Relative humidity：≤ 85％
10.Power consumption of overall unit：≤ 650W
Send product request
Other supplier products
 |
DSHK-2029 Free alkali and free organic acid tester of lubricating grease | A:Overview DSHK-2029 Free alkali and free organic acid tester of lubricating grease adopts “SH/T0329 measurement of lubricating grease&rsquo... |
 |
DSHD-255 Distillation Tester for engine fuel/solvent oil/light petroleum products | A:Brief description: DSHD-255 Distillation Tester for engine fuel/solvent oil/light petroleum products is designed according the National Standard... |
 |
DSHK-1017 Precision adsorption column cleanser | A:Overview DSHK-1017 Precision adsorption column cleanser is domestic precedent. Itsmainuseis to clean and dry the precision adsorption column wit... |
 |
DSHD-2122 Karl Fischer Titrator | A:Brief description: DSHD-2122 Karl Fischer Titrator is designed according the National Standard of People's Republic of China GB/T 11133 Liquid p... |
 |
DSHD-6536B Low-temperature Distillation Tester | A:Brief description: DSHD-6536B Low-temperature Distillation Tester is designed and made as per standards GB/T6536 Test Method for Distillation Ch... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
