Center- Pivot Irrigation Machines
Center- Pivot Irrigation Machines
Equipment running track:
Circular(D). One end of the equipment is fixed in the ground. The motor section connects with the type section and revolves about its center point. Water flow from the center point and then spray from the evenly distributed sprinkler head on the equipment. Because of the circular track, it also is called circular sprinkler, and circular machine for short.
Equipment length:
The span length is 54.5m or 61.3m: the length of the cantilever is from 8m to 28m (4 different choices); the tail nozzle can be optional. Different number and length of span, cantilever and tail nozzle to get the irrigation radius as customers' requirements. The upper limit of the length is 500 meters.
Electricity and water supply:
Electricity supply mode: buried cable and generator set.
Water supply mode: buried pipe and water reservoir.
Span parameters:
Pipe diameter: 141/ 168/ 203/ 254mm;
sprinkler spacing : 0.76/ 1.25/ 2.23m;
through height : 3.25/ 3.4/ 3.9 /4.9m;
flange thickness :10mm;
Main features:
Compare with the other irrigation method, it is more durable and sturdy irrigation uniformity, save energy and labor. Compare with the large lateral move system, the land utilization is 78%. Its low cost of purchase, operation and management. Supporting facilities is simple. Irrigation cycle time is shorter.
Specification:
| Pipe Size | Span Length | A | B | C | D | E |
| 254mm | 41.15m | 4.01m | 41.37m | 2.79m | 4.32m | 41.15m |
| 203mm | 41.15m | 3.91m | 41.47m | 2.72m | 4.45m | 41.15m |
| 203mm | 47.85m | 3.91m | 48.16m | 3.00m | 4.52m | 47.85m |
| 203mm | 54.56m | 3.91m | 54.91m | 2.90m | 4.52m | 54.56m |
| 193mm | 47.84m | 3.92m | 47.84m | 3.2m | 4.95m | 47.84m |
| 193mm | 54.55m | 3.92m | 54.55m | 3.2m | 4.95m | 54.55m |
| 168mm | 47.84m | 3.92m | 47.84m | 3.2m | 4.95m | 47.84m |
| 168mm | 54.55m | 3.92m | 54.55m | 3.2m | 4.95m | 54.55m |
| 168mm | 61.25m | 3.92m | 61.25m | 3.2m | 4.95m | 61.25m |
| 141mm | 47.84m | 3.92m | 47.84m | 3.2m | 4.95m | 47.84m |
| 141mm | 54.55m | 3.92m | 54.55m | 3.2m | 4.95m | 54.55m |
| 141mm | 61.25m | 3.92m | 61.25m | 3.2m | 4.95m | 61.25m |
Overhand Size:
| Overhand Length | F | G | H |
| 8m | 7.62m | 5.33m | 3.75m |
| 14m | 14.32m | 5.33m | 3.75m |
| 21m | 21.03m | 6.7m | 3.75m |
| 28m | 27.73m | 6.7m | 3.75m |
Span Size:
| Span | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Overthang | Eed gun |
| Length/m | 61.34m | 122.34m | 183.34m | 244.34m | 305.34m | 366.34m | 427.34m | 454.14m | 484.14m |
| Area() | 18acres/1.18ha | 70.5acres/4.7ha | 158acres/10.55ha | 281acres/18.75ha | 439acres/29.27ha | 632acres/42.14ha | 860acres/64.76ha | 972acres/64.76ha | 1103acres/73.60ha |
| Irrigation area to total area ratio(%) | 2% | 8% | 18% | 32% | 50% | 72% | 100% | 113% | 128% |
| Water request 9mm/day(m³/hr) | 4 | 18 | 40 | 70 | 110 | 158 | 215 | 242 | 276 |
| Sprinkler power | 0.56 | 1.125 | 1.685 | 2.245 | 2.805 | 3.365 | 3.925 | 3.925 | 5.420 |
Main Technical Parameters：
| No. | Item | Unit | Parameter | |
| 1 | Name | / | DYP-327 Center Pivot Sprinkler | |
| 2 | structural form | / | round (truss) | |
| 3 | matching pump | Name | / | / |
| Flow rate | m³/h | 80-150 | ||
| Head | m | 25 | ||
| 4 | machine length | m | 327 | |
| 5 | incoming flow | m³/h | 80-150 | |
| 6 | Working pressure range | Mpa | 0.20-0.45 | |
| 7 | Number of towers (cross) | Num | 5 | |
| 8 | Spray device | Model/form | / | Nielsen D3000/R3000 |
| Flow rate | m³/h | 0.07-2.7 | ||
| Pressure | Mpa | 0.081-0.28 | ||
| Range | m | 9 | ||
| Number of nozzles | Num | 106 | ||
| Height from the ground | m | 1.5-2.0 | ||
| 9 | Motor Reducer | Name | / | UMC Motor |
| Rated power | kw | 0.55 | ||
| Rated speed | r/min | 35 | ||
| 10 | tower car | form | / | angle steel support |
| Walking speed | m/min | / | ||
| 11 | walking wheel | form | / | rubber wheel |
| Tire model | / | 14.9*24 | ||
| Tire outer diameter | mm | Φ1250 | ||
| 12 | truss | form | / | arch |
| Length (span) | m | 61 | ||
| 13 | main water pipe | outer diameter | mm | Φ168 |
| Wall thickness | mm | 3.0 | ||
| 14 | Invalidity of water distribution | % | 80 | |
| 15 | Irrigation depth | mm | 5-60 | |
| 16 | hours of work productivity | hm²·mm/h | ≥8 | |
| 17 | unit energy consumption | kw·h/hm²·mm | ≤14 | |
Send product request
Other supplier products
 |
Irrigation Accessories | Irrigation Accessories Brief introduction：Enterprise specialized in production of research and development of large sprinkling irrigation eq... |
 |
Hose Reel Irrigation Machines | Hose Reel Irrigation Machines Introduction: Hose reel irrigation has the water hose,hose reel and long range nozzle .The nozzle can mov... |
 |
Drag Type Irrigation Machines | Drag Type Irrigation Machines Equipment running track: Circular(D) drag (E).One model of the circular sprinkler,the difference between the f... |
 |
Drip Irrigation | Drip Irrigation Drip irrigation range: Drip irrigation technology is suitable for any soil, any terrain and any crop that is not densely pla... |
|
Center- Pivot Irrigation Machines | Center- Pivot Irrigation Machines Equipment running track: Circular(D). One end of the equipment is fixed in the ground. The motor section ... |
Same products
 |
DT-JII Medium High Pressure Dual-stage Injection Molding Machine | Seller: Tederic machinery Co., Ltd. | Introduction TEDERIC D-JII medium-to-high pressure dual-stage injection molding machine, develope... |
 |
DT-i Servo Energy-saving Injection Molding Machine | Seller: Tederic machinery Co., Ltd. | Introduction D-i servo energy saving injection molding machine is basically the High rigidit... |
 |
DH-JII Two-platen Medium to High Pressure Dual-stage Injection Molding Machine | Seller: Tederic machinery Co., Ltd. | Introduction DH-JII all hydraulic injection molding machine series is of two-platen clamping unit... |
 |
DE-E All-electric Injection Molding Machine | Seller: Tederic machinery Co., Ltd. | Introduction DE-E series is TEDERIC's high performance all electric injection moulding machine. T... |
 |
DD-MMc Multi-color (marble) Injection Molding Machine | Seller: Tederic machinery Co., Ltd. | Introduction DD-MMc mixed color series is an injection molding machine with two injection units. ... |
