Hydrocyclone Desander
Descriptionsof solids control de sander:
Hydro'cycloneDesander is the 2nd phase mud process equipment in solid control system. The cones size and number can be adjusted according to client's actual capacity requirements. Hydrocyclonesalso can be cast iron or other materials. The bottom shaker can be configured or not. We also can design desander with largerbottom shale shaker, such as linear motion shale shaker.
JinXin Hydrocyclonedesander is widely used in oil and gas drilling, HDD, slurry separation, etc. Industry.For more information, welcome to visit axsolidcontrol dot com
Detailed Product Description1.Sand size solids removal (47~76 microns)2.Polymeric cones3.Lightweight, compact4.Lifting eye welded to frameFeatures
- Polymeric cones
- Lightweight, compact
- Customizable cones configuration as per clients' need
- Lifting eye welded to frame
- Mainly use 8”,10”, 12” desander cones. Desander is to separate particle sized 47~76μm.
Benefits
- Provide better effect for subsequent process
- Provides durable and low cost replacement
- Save much space and provide easy handling
- More flexible, user-friendly and proper cost
- Better to protect equipment when handle and transport
Technique parameters
Model |
CSQ200 |
CSQ250 |
CSQ300 |
CSQ250W |
Treating capacity |
≤120m3/h≤528GPM |
≤180m3/h≤792GPM |
≤240m3/h≤1056GPM |
≤180m3/h≤792GPM |
Desander cones |
8" |
10" |
12" |
10” |
Cones quantity |
1~3EA |
1~3EA |
1~3EA |
1-3 EA |
Working pressure |
||||
Feed inlet |
125mm |
150mm |
150mm |
150mm |
Discharge output |
150mm |
200mm |
200mm |
200mm |
Separation size |
47~76μm |
|||
Bottom shaker screen |
Without shaker |
Send product request
Other supplier products
Hydrocyclone Desilter | Hydrocyclonedesilter is the 3rd phase equipment indrilling fluidsolid control system. Hydrocyclone Desilter’scone including 4" and 5" mainly ... | |
Flare igniter | Flare Ignition Devices is a special equipment to burn the waste gas from mud gas separator. The gas bubbles was remove gas out then come into flare... | |
Decanter Centrifuge | Description: LXJ decanter centrifuge is typical drilling mud process equipment. It is 4th phase solids control equipment. Usually it's set behind m... | |
Hydrocyclone Desander | Descriptionsof solids control de sander: Hydro'cycloneDesander is the 2nd phase mud process equipment in solid control system. The cones size and ... | |
Mud Agitator | Mud Agitator is used on the mud tank , usually one mud tank has 2 or 3 mud agitators. The function of mud agitator is escaping the sediment of soli... |
Same products
Toy flammability tester | Seller: Qinsun Instruments Co., Ltd | The Toy burning tester is designed to determine the safety property (flammability) of equipment, ... | |
PCB circuit board manufacturer for computer component PCB assembly service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... | |
Full Automatic PCB Assembly for Industrial Automation Custom PCB Manufacture PCBA Service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... | |
PCBA Assembly Factory Android Motherboard Products PCBA Printed Circuit Board PCB SMT Service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... | |
PCBA customize air conditioner inverter universal single side PCB control board PCB assembly | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |