Hydrocyclone Desander
Descriptionsof solids control de sander:
Hydro'cycloneDesander is the 2nd phase mud process equipment in solid control system. The cones size and number can be adjusted according to client's actual capacity requirements. Hydrocyclonesalso can be cast iron or other materials. The bottom shaker can be configured or not. We also can design desander with largerbottom shale shaker, such as linear motion shale shaker.
JinXin Hydrocyclonedesander is widely used in oil and gas drilling, HDD, slurry separation, etc. Industry.For more information, welcome to visit axsolidcontrol dot com
Detailed Product Description1.Sand size solids removal (47~76 microns)2.Polymeric cones3.Lightweight, compact4.Lifting eye welded to frameFeatures
- Polymeric cones
- Lightweight, compact
- Customizable cones configuration as per clients' need
- Lifting eye welded to frame
- Mainly use 8”,10”, 12” desander cones. Desander is to separate particle sized 47~76μm.
Benefits
- Provide better effect for subsequent process
- Provides durable and low cost replacement
- Save much space and provide easy handling
- More flexible, user-friendly and proper cost
- Better to protect equipment when handle and transport
Technique parameters
|
Model |
CSQ200 |
CSQ250 |
CSQ300 |
CSQ250W |
|
Treating capacity |
≤120m3/h≤528GPM |
≤180m3/h≤792GPM |
≤240m3/h≤1056GPM |
≤180m3/h≤792GPM |
|
Desander cones |
8" |
10" |
12" |
10” |
|
Cones quantity |
1~3EA |
1~3EA |
1~3EA |
1-3 EA |
|
Working pressure |
||||
|
Feed inlet |
125mm |
150mm |
150mm |
150mm |
|
Discharge output |
150mm |
200mm |
200mm |
200mm |
|
Separation size |
47~76μm |
|||
|
Bottom shaker screen |
Without shaker |
|||
在线联系供应商
Other supplier products
 |
Mongoose MD2/3 Shale Shaker Screen | Mongoose MD2/3 shale shaker screen fits for Swaco mongoose MD series shale shakers. The material is composite material. |
 |
Mud Tank | Mud tank can be square and cylinder type. The mud tank will be configured completely with electrical control, lighting, guard rail, necessary pipel... |
 |
Mud Gun | Mud Gun is a cleaning equipment, the function of mud gun is clearing the solids on mud tank and mud agitator’s impellers. So the mud gun also... |
 |
Decanter Centrifuge | Description: LXJ decanter centrifuge is typical drilling mud process equipment. It is 4th phase solids control equipment. Usually it's set behind m... |
 |
盾构出洞口橡胶帘布 | 橡胶帘布用于隧道工程入洞口和出洞口。在防水上，帘布是不可替代的。 材质：三元乙丙橡胶 内衬：径向尼龙横向棉线 厚度：20mm 内外径尺寸根据实际隧道需要而定 |
Same products
 |
FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | 卖方: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
