QT-3051 series Micro soil lysimeter
Product description: A reasonable assessment of water balance and evapotranspiration is an important part of hydrological cycle; a lysimeter is a useful tool to evaluate the use of water in the soil, water storage and transfer in the same location. QT-3051 series lysimeter can apply to laboratory for the study on parameters relevant to water balance.
QT-3051 series Micro soil lysimeter
To make calculation easy, the height of column barrel of this system is designed to 300 mm, 600 mm, 1200 mm respectively, other height can be customized. The system uses state-of-the-art high-resolution weighing system, high-precision soil moisture and water potential sensor to ensure the accurate measurement of the entire system.
Applications
The lysimeter system can be used in many area, such as water characteristic curve, ecological restoration, small-scale simulation experiment, fluidity of soil water, soil mass transfer, soil absorption and buffering, water balance analysis, leachate analysis, groundwater recharge analysis, mass migration, material transformation research, farming method research, climate research, energy balance studies, correction of simulation experiment, water flux studies, simulation studies on groundwater recharge, determination of the leachate and so on.
Measurement Parameters
Soil column weight
Soil water potential
Soil moisture
Soil temperature
Data acquisition
Basic Input: 8 differential analog channels
Channel extension: AM16/32 channel expansion module, 32 differential analog channel
Storage capacity: 4M memory card
Technical parameters
Measurement items
Measurement range
Accuracy
Soil water moisture
0- saturation
±3%Vol
Soil water potential
0 to -1500 kPa
±10kPa（0 to -100 kPa）
10%（-100 to -1500 kPa）
Soil temperature
-40 ~ 60℃
±0.2℃
Soil column weight
Optional 100 Kg，300 Kg，600 Kg
0.03%
Optional：Soil solution sampling
Description
Capacity of sampling cup
500mL
Length of sampling tube
10,15, 20, 25, 30 to 235 cm optional
Diameter of sampling tube
31/ 63 mm optional
Manual pump
With a negative pressure meter, made of stainless steel or brass.
Electrical pump
With negative pressure meter, accuracy: 1.6%, range: 0 to 250 hPa, power supply: 12 V rechargeable battery, built-in battery charger, charging time is about 7 hours, about 5 hours of continuous use, weight: 5 kg
Origin: China
Other supplier products
|
|
TRIME Access tube |
Product description: TRIME access tube works with TRIME-PICO-IPHTDR soil moisture profile probe.
Specifications
No.
Na... |
|
|
OBS-3+ turbidity sensor |
The OBS3+ sensor uses OBS technology to measure the suspended solids and turbidity in water, and the turbidity can reach 4000NTUs. OBS technology w... |
|
|
GS3 soil moisture conductivity temperature sensor |
Измерение влажности почвы представляет собой диэлектрический датчик, который измеряет изменение емкости на датчике для измерения диэлектрической пр... |
|
|
A100LK wind speed sensor |
The A100LK wind speed sensor is a low-power, pulse output version. The A100LK wind speed sensor directly outputs a frequency signal (Hz), which can... |
|
|
BlackGlobe-thermal stress temperature sensor |
Under defined thermal stress, physical and mental efficiency will be reduced, and in severe cases fatigue, exhaustion, and possibly disability or d... |
All supplier products
Same products
