SkyVUEPRO Ceilometer (formerly CS135)
SkyVUEPRO Ceilometer can be used in meteorology and aviation to measure cloud height and vertical visibility. Using lidar (laser detection and ranging) technology, the instrument emits fast, low-energy laser pulses into the atmosphere, and detects backscatter from clouds and aerosols above the instrument.
The application of precise sub-lens design increases the signal-to-noise ratio of the optical signal compared with other instruments, ensuring measurement accuracy, and by integrating large optical components in a compact design, it guarantees eye safety for 1M levels. This optical design can replace the traditional biaxial or ordinary optical design. The traditional two-axis system optical isolation design is to enhance the sensitivity of the detector, and the new common optical design with a low overlap height is to achieve close range measurement.
main feature:
Sophisticated spectroscope design, obtain high signal-to-noise ratio, maximize detection sensitivity, expand the observation range
Rugged and reliable CSI electronics
Advanced signal processing technology
Comes with blowing and heating functions, built-in heater, fan and radiation shield
Radiation shield and optical filtering to avoid direct sun exposure
Automatically report the status of the observation window
Automatic measuring instrument internal temperature and humidity
Integrated dual-axis tilt compass to ensure the accuracy of measuring height
Adjustable tilt angle vertical, 12 degrees and 6 degrees
Backscatter profile output
Technical Parameters:
SkyVUEPRO Ceilometer
Technical Parameters
Maximum range
10km
Resolution
5 meters
Cloud Report
Up to 4 layers of report information
Vertical visibility
Output when there is no cloud
Hard target measurement accuracy
±0.25 or ±4.6 meters
Reporting cycle
2~120s, can be set
interface
Data: RS232/RS484
Maintenance: USB 2.0 (USB1.1 compatible)
Baud rate: 300~115000
Laser safety
Class 1M, EN60825-1: 2001
Laser wavelength
905nm
powered by
110/115/230VAC, 50-60Hz, maximum power 470W
battery:
Internal 12V 2AH battery provides 1 hour of measurement capability (no blowing/heating)
Operating temperature
-40℃~+60℃
environment humidity
0~100% RH
size
1000x330x316 mm
weight
32Kg (without cable total weight)
25Kg (without shell and hood)
Origin: United States
Send product request
Other supplier products
| PR2 Profile probe access tube | Product description: PR2 profile probe access tube is suited to PR2 soil moister profile probe which can monitor soil water profile in an easy and ... | |
| QT-SM01 Soil Moisture Meter | Product description: The QT-SM01 is a soil moisture meter, consisting of a soil moisture sensor and a portable data logger. It can apply ... | |
| QT-3051 series Micro soil lysimeter | Product description: A reasonable assessment of water balance and evapotranspiration is an important part of hydrological cycle; a lysimeter is a u... | |
| Rugged TROLL 100 and 200 water level gauges | Introduction: Specially used for long-term and short-term monitoring of groundwater and surface water. These non-vented (absolute) water level gaug... | |
| RDO PRO optical dissolved oxygen sensor | The In-Situ RDO PRO sensor uses breakthrough technology to measure the content of dissolved oxygen (DO) in harsh environments. RDO PRO sensors can ... |
















