Instructions of Epoxy Zinc-Rich Primer
It is two components epoxy zinc-rich primer heavy corrosion by zinc primer paint, epoxy resin and other components. On steel surface treated to form a hard, wear-resistant, durable film, and provide long-lasting cathode protection.
Property ofZinc Rich Epoxy Primer Paint
- B. The treated steel with excellent adhesion and corrosion performance.C. Good abrasion resistance, impact resistance.D. As a shop primer does not affect the performance of cutting and welding.E. It can be designed to support a variety of paint as a primer, especially heavy industrial and marine environment protection system.F. Quick drying, can recoat after a short time.
Application of TheZinc Rich Epoxy Primer
Widely applicable to long-term anti-rust primer for steel primer, primer and maintenance, ships, bridges and other steel structures. Especially suitable for industrial, chemical, steel and other heavy-duty offshore matching zinc primer spray paint.
Surface Preparation of The Epoxy Zinc-Rich Prime
The surface roughness of steel welds, rounded edges and clear the splash-melt welding, cleared the surface of the grease, oil and other pollutants; surface sandblasted to ISO standard Sa2.5 level or power tools rust St3 level; surface roughness of 50-85um, before spraying to ensure the surface is dry and clean.The weather is good, the substrate temperature of not less than 5 ℃, relative humidity <85%. It must have good ventilation conditions in confined areas to ensure proper drying of the film. Before fully cured coating should not be exposed to oil, chemicals or mechanical stress.
Coating Application ofZinc Rich Epoxy Paint
Mixing mass ratio: Base material (A): The curing agent (B) = 10: 1.Theoretical amount: 220 g / m2.Painting passes: spraying or brushing 2 to 3, 60 to 80 microns dry.Mixing: Use a power mixer component A (base) Stir, then stirring state by mixing ratio of the added amount of group B (curing agent), and fully mixed, while stirring continued momentum needed painting.Thinner or Cleaner: For supporting diluent.Curing time: After mixed directly.After mixing pot life: 5 hours (23 ℃).
The Construction Method of Epoxy Zinc-Rich Prime
Brush: Recommended for small areas, acute sites and pre-coated and refinishing, but must meet the specified dry film thickness.Spraying: airless spray or air spray, the airless spray is recommended priority.Air spray: a discharge pressure 0.4-0.7Mpa, nozzle diameter 1.8-2.2mm;Airless Spray: discharge pressure 15Mpa, nozzle diameter 0.43-0.48mm;* When used in spray paint, because the need to adjust the viscosity, can be added to a thinner 0-10%.PrecautionsA. The construction and curing required to maintain adequate ventilation.B. Premature exposure to rain or condensation in the state, its color and luster affected.C. Heat resistance: resistance up to 200 ℃ dry heat.D. Weather resistance: can occur when there is no separate outer protective coating exposed some of chalking and yellowing;E. Chemical resistance: resistant to most alcohols, aromatic hydrocarbon solvents and solvent spills and overflows; not directly used in the acidic environment of use; if no suitable overcoat Do not use strong alkaline environment; when a suitable overcoat when neutral salts, basic salt resistance is excellent.F. Wear resistance: completely cured after a good wear resistance.G. Compatibility: polyurethane-based coating can be used with good support.
Shelf Life of The Epoxy Zinc-Rich Prime
Twelve months from the date of manufacture in the original unopened container at 32°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition.Package: 20 kg/ barrel.Contact us get more details about Epoxy Zinc-Rich Primer Coating, such as TDS, Application Method, OEM etc.
Technical Data of The Epoxy Zinc-Rich Prime
|
UNCURED |
|
|
Appearance |
Thick paint |
|
Viscosity |
1700-2200 cP |
|
Cure System |
The catalyst cure |
|
Table Dry |
|
|
CURED At standard conditions (25℃and 50% relative humidity) for 5 days |
|
|
Hardness |
H ( pencil hardness) |
|
Color |
Colored |
|
Gloss |
Flat-high light |
|
Adhesion |
1 |
Ruisenis a professional silicone coating suppliers. We provide High Voltage Insulator Coating Series, Electric Cleaning Agent, zinc rich primer paint, zinc primer coating, epoxy zinc primer, zinc rich primerand so on. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Multifunctional Insulator Cleaning Agent RS-10 | Multifunctional Insulator CleaningAgent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, esp... |
 |
RTV High Voltage Insulator Coating | Anti-pollution Flashover Coating (rtv insulator coating) High Voltage Insulator Coatings (HVIC) To prevent the electrical equipment from pollution... |
 |
Hollow & Bushing Insulator | We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potenti... |
 |
Silicone Rubber Shield for Porcelain Insulators | Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap... |
 |
RTV High Voltage Insulator Coating | Anti-pollution Flashover Coating (RTV) High Voltage Insulator Coatings (HVIC) To prevent the electrical equipment from pollution flashover in h... |
Same products
 |
Toy flammability tester | Seller: Qinsun Instruments Co., Ltd | The Toy burning tester is designed to determine the safety property (flammability) of equipment, ... |
 |
PCB circuit board manufacturer for computer component PCB assembly service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
 |
Full Automatic PCB Assembly for Industrial Automation Custom PCB Manufacture PCBA Service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
 |
PCBA Assembly Factory Android Motherboard Products PCBA Printed Circuit Board PCB SMT Service | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
 |
PCBA customize air conditioner inverter universal single side PCB control board PCB assembly | Seller: Shenzhen STHL Electronics Co.,Ltd. | SERVICES:electronic material procurement, PCB production, PCBA assembly, cable assembly, finished... |
