granulated-fused-refining-fluxes
General Introduction:
SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, calcium, lithium) and non-metallic inclusions (oxides, borides and carbides) from liquid aluminium and al-alloys. It’s in-furnace metal treatment flux.
The main chemical compositions of different fluxes based on Mgcl2 anhydrous, Kcl, Nacl, CaF2, Na3ALF6, K3ALF6 and etc. These raw materials are fused in a furnace to a high temperature, cooled and crushed. Compare to the powder mixed. Fused fluxes have a single sharp melting point rather than mixed powder flux has a melting range. The melting point belows 483℃. And some are free from fluorides, sodium, which is suitable for high magnesium al-alloy. Some fluxes has a very small amount of calcium fluoride added to MgCl2/KCl flux leads to a significant increase in the inclusion and alkali removal performance. The MgCl2 minimizes or eliminates surface oxidation by creating a thin-film layer on the metal surface, thus cover fluxes can be avoided if the refining flux contains enough MgCl2.
Advantage Of Granular Flux:
Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
Uniform size, reacts fully. Purify the melt improve melt quality.
Increases the extrusion speed and die life when extruding profiles
Reduces the number of breaks in continuous casting
Sodium-free flux suitable for high mg al-alloy eliminates edge cracks when rolling high Mg aluminium alloys
Free of fluorides. Zero fluoride emissions.
Low melting point for rapid dispersion
Effectively remove the aluminium slag and hydrogen, performance excellent on refining and drossing.
Addition and stirring of flux by means of flux feeder (with Nitrogen or Argon) gives the highest refining efficiency.
In the meanwhile, oxide inclusions can be separated from the melt, and generated dry slag (white dross),reduce metal loss.
Less dosage, high effectiveness, save cost for customer refining and degassing slag, it can protect and clean molten aluminium.
Send product request
Other supplier products
 |
Magnesium Chloride Anhydrous | Anhydrous magnesium chloride is our main raw materials for producing foundry fluxes, it is a byproduct of titanium sponge from the three largest ti... |
 |
Fluxes for Magnesium Alloy | Magnesium alloy has a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when overhea... |
 |
Reclaimed Fluxes | General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux, recovery of grindin... |
 |
Drossing Flux | Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux also name aluminum drossing fluxis specially developed for... |
 |
Potassium Aluminum Fluoride (PAF) | General Description of Potassium Aluminum Fluoride (PAF) It is also called Potassium Cryolite, Potassium Tetrafluoraluminate, Kalium Aluminium Flu... |
Same products
 |
fogging test equipment | Seller: Standard International Group (HK) Limited | Working Principle: The main frame of theFogging Testerincludes a water sink fully filled with sp... |
 |
High quality Jewerly wax for gold and silver | Seller: Syntop chemical Co.,Ltd. | Casting wax is mainly used in the field of aviation industry, civil precision casting, but also i... |
 |
MYY, ein renommierter Großzahnhersteller in Deutschland | Seller: Hong Kong denture Laboratory, China | Shenzhen MYY Dental Technology Co., Ltd. wurde im Jahr 2000 gegründet. Es ist ein chinesisch... |
 |
Perma PRO 250 106649 Lubricant Cartridge H1 SF10 Lubricant Cartridge | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | |
 |
Cranberry Extract | Seller: Yongzhou Jingmu Biotechnology Co., Ltd. | Cranberries, predominantly grown in North America, contain unique proanthocyanidins that prevent ... |
