ADSS Fiber Optic Cable
Fiber Optic ADSS Cableis known as all dielectric self-supporting optical cable. Self-supporting ensures that the adss fiber optic cable has sufficient mechanical strength. The adss fiber cableapplies all dielectric material to withstand the impact of strong electricity in a high voltage and strong current environment.
As one of the professional fiber optic accessories suppliers, TUOLIMA can customize the self supporting fiber optic cable adssaccording to your requirements. If you need any technical support, we will also recommend the most suitable and cost-effective customized adss kabel for you according to the use environment, laying method and terminal customer requirements of the optical cable. Our adss wire and cable can be applied in many areas, for example use the adss aerial fiber optic cable in aerial industry.
Specification of ADSS Fiber OpticCable
|
Mechanical characteristic and test method |
||
|
Tensile strength |
conform to IEEEC standard P |
|
|
Crush |
conform to IEC 794-1-E3 |
|
|
Impact |
conform to IEC 794-1-E4 |
|
|
Repeated bending |
conform to IEC 794-1-E6 |
|
|
Torsion |
conform to IEC 794-1-E7 |
|
|
Flexing |
conform to IEC 794-1-E8 |
|
|
Cable bend |
conform to IEC 794-1-E11 |
|
|
Water penetration |
conform to IEC 794-1-F5B |
|
|
Color coding |
conform to EIA/TIA 598 |
|
|
Temperature requirement |
operation: Installation |
- 40 C~ +60 C - 10 C ~ +60 C |
|
storage/transportation |
- 40 C ~ +60 C |
|
|
Temperature cycling test |
conform to IEC 794-1-F1 |
|
|
Bending Radius |
unloaded |
15 times of outer diameter |
|
loaded |
25 times of outer diameter |
|
Characteristics of ADSS Fiber Optic Cable
|
Fiber Material |
G652D |
|
Mode field diameter (1310nm): |
|
|
Mode field diameter (1550nm): |
|
|
Cladding diameter: |
125um±1.0um |
|
Cut off wavelength of cabled fiber (ℷcc): |
≤1260nm |
|
Attenuation at 1310nm: |
≤0.36dB/km |
|
Attenuation at 1550nm: |
≤0.22dB/km |
|
Bending loss at 1550nm (100 turns, 30mm radius): |
≤0.05dB |
|
Dispersion in the range 1288 to 1339nm: |
≤3.5ps/(nm•km) |
|
Dispersion at 1550nm: |
≤18ps/(nm•km) |
|
Dispersion slope at zero dispersion wavelength: |
≤0.092ps/(nm2•km) |
Details ofADSS Fiber Optic Cable
|
SN |
Item |
Unit |
Value |
|
1 |
count |
12~288 |
|
|
2 |
Number of fibers per tube(max) |
count |
4 |
|
3 |
Number of elements |
count |
6 |
|
4 |
Cable diameter |
mm |
|
|
5 |
Cable weight |
kg/km |
121 |
|
6 |
Max allowed operating tension |
N |
5000 |
|
7 |
Short term crush |
N/100mm |
2200 |
|
8 |
Max span with 1.0% installation sag |
m |
100 |
Advantages of ADSS Cable
lUninterruptible power supply erection
lAdopt PE/AT sheath, excellent resistance to erosion
lSmall cable diameter and lightweight help reduce the impact of ice, wind, and load on towers
lLarge span, maximum span≥ 1000 meters
lGreat tensile strength and high/low-temperature resistance
lService life is expected over 30 years
Packing and Comments of ADSS Fiber Optic Cable
lPacking material: Non-returnable wooden drum.
Both ends of the outdoor optical cable are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
lCable printing: The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.
The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.
Cable type and number of optical fiber
Manufacturer name
Month and Year of Manufacture
Cable length
lDrum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:
Manufacture name and logo
Cable length
Fiber optic cable types and number of fibers
Rollway
Gross and net weight
TUOLIMA is a professional fiber optic products supplier, we provide indoor fiber optic cable, outdoor fiber optic cableand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
TLMOR21030D FTTH Fiber Optic Receiver | TLMOR21030D is a new and practical product developed for the special needs of the cable TV industry. It caters to the passive terminal receiving eq... |
 |
H3 Tension Cable Clamp | plastic tension clamp, use for figure 8 cable, and choose the type according to the diameter of messenger and the cable load. For optical ADSS f... |
 |
Rack Mount Patch Panels | As a fiber optic products supplierin the world, TUOLIMA has been operating in the optical communication industry since 2009, mainly fabricating and... |
 |
TLM-B05 Drop Cable Protection Box | TLM-B05 drop cable splice protection boxis a case to put in a flat cable with a thermal protection tube after hot melting so that the splice spot c... |
 |
Fiber Optic Receivers | An optical receiver, sometimes called a fiber optic receiver, is a component in a fiber optic network. The role of the receiver is to translate pu... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
