Ferrite/Ceramic Magnets
Category: hard ferrite magnets/ ceramic magnets
Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed
Disadvantages: low magnetic energy; not resistant to low temperature
Hard China ferrite magnetsbelong to sintered permanent magnetic material, which made from oxide iron, barium, and strontium carbonate by ceramic processing technology, just because of the processing method, it also named as China ceramic magnetsin America.This magnetic material has strong ability to resist demagnetization and the advantage of low cost.
Ferrite block magnetsclassified as isotropic and anisotropic. Isotropic ferrite magnets have weak magnetic strength, but it can be magnetized through different directions. Anisotropic ferrite magnets have stronger magnetic strength than isotropic, but it can be only magnetized through certain direction.
By magnetic strength, ferrite magnets or ceramic magnets are much weaker than neodymium permanent magnets and SmCo magnets, but stronger than AlNiCo magnets. But its advantages of low cost, excellent corrosion and demagnetization resistance, which makes it widely used in the area of magnetic separator, speaker magnets, magnetic toys, office magnets, car magnets. From the aspect of shape, hard ferrite magnets are usually available as ceramic block magnets, ferrite ring magnets, plastic coated disc magnetsand ceramic block magnets. Ferrite disc magnets often used on office magnets, ferrite ring magnets often used to make loudspeaker, ferrite block magnets can be used to make separate magnets.
Ferrite magnets (ceramic magnets ) was developed in the year of 1960, and it is lower in power (B, Br, BHmax) compared to other formulations, and are very brittle. However, they have very high Hcj and good Tc, and are quite corrosion-resistant. So ceramic magnets are a cost-effective choice.
As a holding magnets manufacturer, Ferrite magnets produced by powder metallurgy ways, the remanence is low, The coercive force is high, especially suit for magnetic structure used in the condition of dynamic operation. The material is hard and crisp, silicon carbide tools are used for cutting machine. The main material for ferrite magnets is oxide, not easy to be rust. Permanent ferrite is corrosion resistant magnets or corrosion proof magnets material.
|
Grade |
Br |
HcB |
HcJ |
(BH)max |
Work Temp |
|
|
China Standard |
IEC standard |
mT |
kA/m(min.) |
kA/m(min.) |
kJ/m(min.) |
℃(max.) |
|
Y10T |
HF 8/22 |
200-235 |
125-160 |
210-280 |
6,5-9,5 |
250 |
|
Y20 |
HF 20/19 |
320-380 |
135-190 |
140-195 |
18,0-22,0 |
250 |
|
Y22H |
HF 20/28 |
310-360 |
220-250 |
280-320 |
20,0-24,0 |
250 |
|
Y23 |
HF 22/30 |
320-370 |
170-190 |
190-230 |
20,0-25,0 |
250 |
|
Y25 |
HF 24/16 |
360-400 |
135-170 |
140-200 |
22,5-28,0 |
250 |
|
Y26H |
HF 24/23 |
360-390 |
220-250 |
225-255 |
23,0-28,0 |
250 |
|
Y26H-2 |
HF 24/35 |
360-380 |
263-288 |
318-350 |
24,0-28,0 |
250 |
|
Y28 |
HF 26/16 |
370-400 |
175-210 |
180-220 |
26,0-30,0 |
250 |
|
Y25H |
HF 26/18 |
360-390 |
175-215 |
215-230 |
24,0-27,0 |
250 |
|
Y28H |
HF 26/24 |
380-400 |
240-260 |
250-280 |
27,0-30,0 |
250 |
|
Y28H-2 |
HF 26/26 |
360-380 |
270-295 |
380-405 |
26,0-30,0 |
250 |
|
Y30 |
HF 28/16 |
380-385 |
190-210 |
200-220 |
26,0-28,0 |
250 |
|
Y30BH |
HF 28/28 |
380-400 |
230-275 |
235-290 |
27,0-32,0 |
250 |
|
Y30H-2 |
HF 30/26 |
395-415 |
275-300 |
310-335 |
28,5-32,5 |
250 |
|
Y32 |
HF 32/17 |
400-420 |
160-190 |
165-195 |
30,0-33,5 |
250 |
|
Y33 |
HF 32/22 |
410-430 |
220-250 |
225-255 |
31,5-35,0 |
250 |
|
Y33H |
HF 32/25 |
410-430 |
240-270 |
250-275 |
31,5-35,0 |
250 |
|
Y35 |
- |
410-430 |
175-195 |
180-200 |
30,0-32,0 |
250 |
Property/Performance Parameter of Ceramic Magnets(America Standard)
|
Material |
Br |
HcB |
HcJ |
(BH) Max |
||||
|
mT |
KG |
KA/m |
KOe |
KA/m |
KOe |
Kj/m3 |
MGOe |
|
|
C1 |
230 |
148 |
258 |
|||||
|
C5 |
380 |
191 |
199 |
|||||
|
C7 |
340 |
258 |
318 |
|||||
|
C8 |
385 |
235 |
242 |
|||||
|
C8B |
420 |
232 |
236 |
|||||
|
C9 |
380 |
280 |
320 |
|||||
|
C10 |
400 |
288 |
280 |
|||||
|
C11 |
430 |
200 |
204 |
|||||
Send product request
Other supplier products
 |
Mono-Pole Magnets | Mono pole magnets(also called as single pole magnets) are the magnets that only one surface have magnetism, the other surface just has very weak ... |
 |
Magnetic Stick Toys | Magnetic Stick Toy Magnetic sticks are the same as magnetic panels, they are also construction intelligence toys that rely on the magnetic force.... |
 |
Magnetic Catchers | Magnetic catcher is a kind of magnetic device consist of plastic case and magnets, it is an ideal magnetic tool for adsorbing, picking up and separ... |
 |
Neodymium Ring Magnets | Ring ndfeb magnetsmean the magnets that in a ring shape, someone calls them magnet rings. Strong ring magnets is one of the common types of permane... |
 |
Permanent Magnets | Under this contents, we introduce each kind of magnetic material more intuitive. We know that any magnetic material must work for people as a certa... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
