Ferrite/Ceramic Magnets
Category: hard ferrite magnets/ ceramic magnets
Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed
Disadvantages: low magnetic energy; not resistant to low temperature
Hard China ferrite magnetsbelong to sintered permanent magnetic material, which made from oxide iron, barium, and strontium carbonate by ceramic processing technology, just because of the processing method, it also named as China ceramic magnetsin America.This magnetic material has strong ability to resist demagnetization and the advantage of low cost.
Ferrite block magnetsclassified as isotropic and anisotropic. Isotropic ferrite magnets have weak magnetic strength, but it can be magnetized through different directions. Anisotropic ferrite magnets have stronger magnetic strength than isotropic, but it can be only magnetized through certain direction.
By magnetic strength, ferrite magnets or ceramic magnets are much weaker than neodymium permanent magnets and SmCo magnets, but stronger than AlNiCo magnets. But its advantages of low cost, excellent corrosion and demagnetization resistance, which makes it widely used in the area of magnetic separator, speaker magnets, magnetic toys, office magnets, car magnets. From the aspect of shape, hard ferrite magnets are usually available as ceramic block magnets, ferrite ring magnets, plastic coated disc magnetsand ceramic block magnets. Ferrite disc magnets often used on office magnets, ferrite ring magnets often used to make loudspeaker, ferrite block magnets can be used to make separate magnets.
Ferrite magnets (ceramic magnets ) was developed in the year of 1960, and it is lower in power (B, Br, BHmax) compared to other formulations, and are very brittle. However, they have very high Hcj and good Tc, and are quite corrosion-resistant. So ceramic magnets are a cost-effective choice.
As a holding magnets manufacturer, Ferrite magnets produced by powder metallurgy ways, the remanence is low, The coercive force is high, especially suit for magnetic structure used in the condition of dynamic operation. The material is hard and crisp, silicon carbide tools are used for cutting machine. The main material for ferrite magnets is oxide, not easy to be rust. Permanent ferrite is corrosion resistant magnets or corrosion proof magnets material.
|
Grade |
Br |
HcB |
HcJ |
(BH)max |
Work Temp |
|
|
China Standard |
IEC standard |
mT |
kA/m(min.) |
kA/m(min.) |
kJ/m(min.) |
℃(max.) |
|
Y10T |
HF 8/22 |
200-235 |
125-160 |
210-280 |
6,5-9,5 |
250 |
|
Y20 |
HF 20/19 |
320-380 |
135-190 |
140-195 |
18,0-22,0 |
250 |
|
Y22H |
HF 20/28 |
310-360 |
220-250 |
280-320 |
20,0-24,0 |
250 |
|
Y23 |
HF 22/30 |
320-370 |
170-190 |
190-230 |
20,0-25,0 |
250 |
|
Y25 |
HF 24/16 |
360-400 |
135-170 |
140-200 |
22,5-28,0 |
250 |
|
Y26H |
HF 24/23 |
360-390 |
220-250 |
225-255 |
23,0-28,0 |
250 |
|
Y26H-2 |
HF 24/35 |
360-380 |
263-288 |
318-350 |
24,0-28,0 |
250 |
|
Y28 |
HF 26/16 |
370-400 |
175-210 |
180-220 |
26,0-30,0 |
250 |
|
Y25H |
HF 26/18 |
360-390 |
175-215 |
215-230 |
24,0-27,0 |
250 |
|
Y28H |
HF 26/24 |
380-400 |
240-260 |
250-280 |
27,0-30,0 |
250 |
|
Y28H-2 |
HF 26/26 |
360-380 |
270-295 |
380-405 |
26,0-30,0 |
250 |
|
Y30 |
HF 28/16 |
380-385 |
190-210 |
200-220 |
26,0-28,0 |
250 |
|
Y30BH |
HF 28/28 |
380-400 |
230-275 |
235-290 |
27,0-32,0 |
250 |
|
Y30H-2 |
HF 30/26 |
395-415 |
275-300 |
310-335 |
28,5-32,5 |
250 |
|
Y32 |
HF 32/17 |
400-420 |
160-190 |
165-195 |
30,0-33,5 |
250 |
|
Y33 |
HF 32/22 |
410-430 |
220-250 |
225-255 |
31,5-35,0 |
250 |
|
Y33H |
HF 32/25 |
410-430 |
240-270 |
250-275 |
31,5-35,0 |
250 |
|
Y35 |
- |
410-430 |
175-195 |
180-200 |
30,0-32,0 |
250 |
Property/Performance Parameter of Ceramic Magnets(America Standard)
|
Material |
Br |
HcB |
HcJ |
(BH) Max |
||||
|
mT |
KG |
KA/m |
KOe |
KA/m |
KOe |
Kj/m3 |
MGOe |
|
|
C1 |
230 |
148 |
258 |
|||||
|
C5 |
380 |
191 |
199 |
|||||
|
C7 |
340 |
258 |
318 |
|||||
|
C8 |
385 |
235 |
242 |
|||||
|
C8B |
420 |
232 |
236 |
|||||
|
C9 |
380 |
280 |
320 |
|||||
|
C10 |
400 |
288 |
280 |
|||||
|
C11 |
430 |
200 |
204 |
|||||
在线联系供应商
Other supplier products
 |
Rubber Magnetic Sheets | Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnet... |
 |
Rubber/Flexible Magnets | Brief introduction of rubber magnets(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , t... |
 |
Magnetic Lifter | Category: permanent magnetic lifter china lifting magnets Advantages: scientific magnetic circuit disign, powerful magnets used, strong magnetic ho... |
 |
Neodymium Tube Magnets | Tube magnets are permanent magnets in a tube shape. The tubes made of magnetic material are called magnet tubes or magnetic tubes. It becomes to be... |
 |
Neodymium/NdFeB Magnets | Neodymium-iron-boron magnets short asNdFeB magnets,NIB magnets,neo magnetsor neodymium magnets. Following called as NdFeB magnets or neodymium ma... |
Same products
 |
卖方: 石家庄英纺贸易有限公司 | ||
 |
Micronized wax powder for shoe polish processing | 卖方: Syntop chemical Co.,Ltd. | Micronized wax powder is used as a functional additive in shoe polish processing. Its core functi... |
 |
Preform Mould | 卖方: Taizhou Qihong Mold Co., Ltd. | Taizhou Qihong Mold Co., Ltd. provides professionally designed Preform Mould solutions for modern... |
 |
Micronized Wax used as dispersant for color masterbatch | 卖方: Syntop chemical Co.,Ltd. | Micronized wax is a highly effective pigment dispersant in color masterbatch. Its core mechanism ... |
 |
Automated Parallel Concentrator ORAS-12 | 卖方: Beijing Orun Scientific Instrument Co., Ltd. | Automated Parallel Concentrator ORAS-12 The direction of the blow needle is adjustable. Nitrogen... |
