Silicone Rubber Shield for Porcelain Insulators
Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap and pin type suspension insulator) from bird damage, lightning attack, etc.
Features of High Voltage Booster Shed
Apart from increasing the flashover performance of insulators, silicone rubber shield for porcelain insulators is perfect for reducing the surface electrical stress and leakage current and increasing the electric strength of the insulators.
Product Features of Busbar Insulation Coating:
Product Standard of Busbar Insulation Coating:
DL/T 627-2012 Room Temperature Vulcanized Silicone Rubber Anti-Pollution Coating for Insulators
IEEE 1523 IEEE Guide for Application, Maintenance, and Evaluation of Room Temperature Vulcanized (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
Contact us get more details about RTV-II Silicone Rubber Coating, such as TDS, Application Method, OEM etc.
|
Item |
Silicone Rubber Insulation Coating |
Heat Shrink Tube |
|
Electrical Insulation |
Excellent electrical insulation. Breakdown Voltage is more than 25 kV/mm. |
Common performance. |
|
Cover Effect |
Excellent adhesion.The coating layer is intense, it could strongly stick to the equipment surface and could well resist to the corrosion caused by acid, alkali, salt and air. |
Common cover effect especially in the connection part. |
|
Thermal Conductivity |
The coating has closely attached to the conductor and has good thermal conductivity could better release the heat of equipment. Its thermal conductivity is 0.2W/ (m. k), which is ten times then air. |
Relatively poor due to there is air gap between the tube and equipment. |
|
Flame Retardant |
Hard to burn and has good fire retarding ability up to FV-0 Class. |
Easy to deform, crack and broke. |
|
Application |
Favorable hardness makes its construction time is short. (less than one working day)It can well fit and protect the surface of special shaped equipment or components and special connection position so that to make the conductors as one. |
Long construction time and need to disassemble the equipment.It’s easy to crack and broken for the coating on the special shaped equipment or components and the connection or twist place. |
|
Maintenance |
Easy to maintain and repair. The coating will not affect the dismounting of screw or bolt. Moreover, if recoating, the new coating can have integrated fuse with the old coating tightly. |
Although it’s also convenient to maintain and repair, but the connection place is easy to peel and broke. |
|
Ageing Resistance |
Good hydrophobicity and resistance to ageing, dampness, ozone, radiation, UV, etc. make it free of maintenance and can serve for a long time. Its service life could be more than 20 years. |
Poor ageing resistance, its service time is about 5 years or even less especially in some bad environment the cracking and break phenomenon will happen. |
|
Economic |
Excellent performance at reasonable cost. |
Lower cost. |
Ruisen is a professional silicone coating suppliers, we provide composite polymer insulator, silicone composite insulatorsand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Composite Insulator | We offer different kinds of composite insulator for substation. Contact us get more details about composite insulator, such as TDS, Application Met... |
 |
Anti-Algae & Anti-Fouling Coating | Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C... |
 |
Composite Insulator | As the composite insulators manufacturers, we offer different kinds of composite polymer insulator. Contact us get more details about composite ins... |
 |
Line Post Insulator | Fujian RuiSenNew Materials Co., Ltd. was established in 2007, located in Fujian Province, China. RuiSen is the largest manufacturer of RTV Silicone... |
 |
Insulator & Electric Series | We offer different kinds of Station Post Insulator for Substation, Line Post Insulator, Disc Suspension Insulator,high voltage ceramic insulators， ... |
Same products
 |
10000L Bright Beer Tank | Seller: Shandong HG Engineering Equipment Co., Ltd. | 10000L Bright Beer Tank is often also called serving tank, tax determination tanks or clear beer ... |
 |
2000L Fermentation Tank | Seller: Shandong HG Engineering Equipment Co., Ltd. | 2000L Fermentation Tank is a Modular cylindrically-conical tank consist of a base tank (BT) and e... |
 |
300CPH(5CPM) Semi-Auto Beer Canning Machine | Seller: Shandong HG Engineering Equipment Co., Ltd. | 300CPH(5CPM) Semi-Auto Beer Canning Machine is specifically designed to beer filling and include ... |
 |
2000L 2 Vessel Copper Beer Brewing Equipment | Seller: Shandong HG Engineering Equipment Co., Ltd. | 2000L 2 Vessel Copper Beer Brewing Equipment , Copper has the highest heat conductivity, is easy ... |
 |
1000L 3 Vessel Beer Brewing Equipment | Seller: Shandong HG Engineering Equipment Co., Ltd. | 1000L 3 Vessel Beer Brewing Equipment is a brewery for restaurants, commecial and industrial brew... |
