.

Silicone Rubber Shield for Porcelain Insulators

Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap and pin type suspension insulator) from bird damage, lightning attack, etc.

Features of High Voltage Booster Shed

Apart from increasing the flashover performance of insulators, silicone rubber shield for porcelain insulators is perfect for reducing the surface electrical stress and leakage current and increasing the electric strength of the insulators.

Product Features of Busbar Insulation Coating:

Product Standard of Busbar Insulation Coating:

DL/T 627-2012 Room Temperature Vulcanized Silicone Rubber Anti-Pollution Coating for Insulators

IEEE 1523 IEEE Guide for Application, Maintenance, and Evaluation of Room Temperature Vulcanized (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators

Contact us get more details about RTV-II Silicone Rubber Coating, such as TDS, Application Method, OEM etc.

Item

Silicone Rubber Insulation Coating

Heat Shrink Tube

Electrical Insulation

Excellent electrical insulation. Breakdown Voltage is more than 25 kV/mm.

Common performance.

Cover Effect

Excellent adhesion.The coating layer is intense, it could strongly stick to the equipment surface and could well resist to the corrosion caused by acid, alkali, salt and air.

Common cover effect especially in the connection part.

Thermal Conductivity

The coating has closely attached to the conductor and has good thermal conductivity could better release the heat of equipment. Its thermal conductivity is 0.2W/ (m. k), which is ten times then air.

Relatively poor due to there is air gap between the tube and equipment.

Flame Retardant

Hard to burn and has good fire retarding ability up to FV-0 Class.

Easy to deform, crack and broke.

Application

Favorable hardness makes its construction time is short. (less than one working day)It can well fit and protect the surface of special shaped equipment or components and special connection position so that to make the conductors as one.

Long construction time and need to disassemble the equipment.It’s easy to crack and broken for the coating on the special shaped equipment or components and the connection or twist place.

Maintenance

Easy to maintain and repair. The coating will not affect the dismounting of screw or bolt. Moreover, if recoating, the new coating can have integrated fuse with the old coating tightly.

Although it’s also convenient to maintain and repair, but the connection place is easy to peel and broke.

Ageing Resistance

Good hydrophobicity and resistance to ageing, dampness, ozone, radiation, UV, etc. make it free of maintenance and can serve for a long time. Its service life could be more than 20 years.

Poor ageing resistance, its service time is about 5 years or even less especially in some bad environment the cracking and break phenomenon will happen.

Economic

Excellent performance at reasonable cost.

Lower cost.

Ruisen is a professional silicone coating suppliers, we provide composite polymer insulator, silicone composite insulatorsand etc. Want to know more? Please contact us.


在线联系供应商

至: Fujian Ruisen New Materials Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Enhanced Anti-pollution Flashover Coating RTV-II
Enhanced Anti-pollution Flashover Coating RTV-II A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental condi...
PRODUCT CENTER
PRODUCT CENTER We are a professional manufacturer of power insulation products, our products cover power transmission, distribution and daily life, such as, PRTV ...
Instructions of Epoxy Zinc-Rich Primer
Instructions of Epoxy Zinc-Rich Primer It is two components epoxy zinc-rich primer heavy corrosion by zinc primer paint, epoxy resin and other components. On steel surface treated to for...
Self-cleaning & Anti-tracking Coating SRTV
Self-cleaning & Anti-tracking Coating SRTV Well solve the hydrophobicity loss problem of silicone rubber external insulation when in continual rainy and wet weather. It also helps to lessen ...
Hollow & Bushing Insulator
Hollow & Bushing Insulator We offer different kinds of hollow porcelain insulator& Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Di...
供应产品

Same products

C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower 卖方: Greentech International (Zhangqiu) Co., Ltd Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif...
Common Rail injector control valve F00VC01303
Common Rail injector control valve F00VC01303 卖方: China Lutong Part Plant Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common...
Common Rail injector control valve F00VC01200
Common Rail injector control valve F00VC01200 卖方: China Lutong Part Plant Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common...
Injector Control Valve Plate 24#
Injector Control Valve Plate 24# 卖方: China Lutong Part Plant Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...
Injector Control Valve Plate 12#
Injector Control Valve Plate 12# 卖方: China Lutong Part Plant Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto...