H-Beam Welding Line
Beam welding line machineconsists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can reach about 2m/min.Regularly, we adopt Lincoln welding machine (DC-1000) and NA-5 control system.
JH-150A h beam welding linefor H-profile steel is a wonderful technical product that integrates mechanical, electric, and pneumatic technologies. The machine, using advanced technology of single-arc double-wire welding, greatly increases the production efficiency.
The half line and whole line of H-Beam Welding Line Machine are different. The whole production line includes the turnover device and a second welder and it's related roller conveyor, while the half production line doesn't include the above-mentioned parts.
Video of H-Beam Welding Line
H-beam welding line, which is developed by Zhejiang Jinggong Science and Technology Co., Ltd., achieves the quality production of H-beam. It's the most advanced H-beam equipment domestically. H-beam welding line consists of the assembling machine, main welder, turnover device, and conveyor, etc.
H-beam welding line is very well received and widely applied by most steel structural enterprises for its high efficiency, big production scope, easy operation, and small space, etc.
Size Of Raw Materials Required For H-Beam Welding Line
Web height: 250-1500mm
Web thickness: 3-12mm
Flange width: 150-500mm
Flange thickness: 5-25mm
Length suitable workpiece: 2000～15000mm
Components of H-Beam Welding Line
Assembly Machine
The assembly machine is the first stage before entering the main welder. Before entering the main welder, the web plate and flange plate are to be assembled. By stop welding the two heads of the workpiece, H-beam assembling can be completed to go on the next stage.
Main Welding Machine
The main welding machine is the main equipment for this production line. After the assembled three plates are fed to the main welder through the conveyor, the welding process is started, and through positioning, clamping, and adjustment, until the whole process is completed.
Turnover Device
he turnover device is the assisting equipment of H-beam welding, one side welded H-beam will be transported to turn over device through the conveyor, and to turn over about 180 degrees, and to go on through conveyor to the main welder for welding the other side.
Compared with the traditional welding line, the H-beam welding line has the following seven advantages:
If you want to know more about jinggong,please visit our website.
Send product request
Other supplier products
 |
.Purlin Roll Forming Machine | The china purlin roll forming machine, also calledpurlin roll former, can change the profile and specifications automatically without replacing the... |
 |
Steel Deck Roll Forming Machine | The sheet produced by this deck roll forming machinehas high strength with big wavelength, and adheres well to concrete. Used on tall buildings, it... |
 |
CNC Drilling Machine | This CNC drilling machineemploys AC servo motor to drive the X axis and Y axis, while its Z axis is positioned by high accuracy raster ruler. By us... |
 |
H Beam Shot Blasting Machine | H beam shot blasting machineis designed and manufactured to clean the surface of the section steel. It is ideally suited for removing the rust, sca... |
 |
EPS Sandwich Panel Production Line | Main structure features ofEPS Sandwich Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
