Products
To provide extensive optical solutions in machine vision optics systems, Canrill Optics, as a custom lens manufacturer, has been keeping developing, manufacturing and marketing telecentric lensfor machine vision since 2009. In 2019 and 2020, Canrill Optics has successfully upgraded the telecentric lens to 4th generation PTL series and developed new series of non-telecentric Canrill lens.
Machine Vision Lens & Illuminator
Since 2009, Canrill has provided more than 1700 kinds of high-performance telecentric lens and illuminators for machine vision system. With the characteristics of extensive models, immediate delivery, cost-effective solutions and free customization service, Canrill can always be your first choice to select the most suitable machine vision lens and illuminators.
Types of Optical Lens & Illuminator
Wide range of high performance telecentric lens type supporting sensor size from 4.8mm to 82mm, characterized by high resolution, little-to-no-distortion, and good imaging consistency. We
also provide a competitive optical lens pricefor customers.
Machine Vision Telecentric Illuminator
9 types of telecentric illuminator covering the beam diameter from 20mm to 238mm, offering higher edge contrast, and is recommended for high accuracy measurement.
Non-Telecentric Lens
Non-telecentric lens MH series is the latest series Canrill has developed in 2020, suitable for measurement and high-end positioning applications which do not require telecentricity. A supplement and replacement of FA lens and low resolution telecentric lens.
Microscope Objective Lens
Canrill miscroscopy lens VM series adopt modular design, different combinations can realize different functions. Major module consists of main body, illumination, horizontal imaging module, mount and other special parts.
DMD Lithography Lens
Canrill dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband from 360nm to 400nm while ensuring the image quality in the same time
Telecentric Lens Accessory
Canrill offers different types of prism, controller and point illumination to support the use of our high quality lens. Whether you need to bend light for applications with space constraints, or point illumination matched with magnification lens, Canrill has options to help you optimize your solution as much as possible.
Advantages Of Machine Vision System At Canrill
11 Years' R&D Experience
11 Years' R&D experience on telecentric lenses and optics solutions for various applications since 2009, professional and experienced to offer existing or customized vision products for different industries.
20+ Senior Researchers
More than 20 senior researchers in both optical and mechanical fields ensure the upgrading of new series and unmatched lenses and types of lenses service.
1um Accuracy
High resolution with the measurement accuracy as high as 1um of this kind of lens.
1700+ Models
More than 1700 models of the telecentric lens and other machine vision illuminator and lens products in the existing product line and this number keeps increasing per day.
Lifetime Warranty
Canrill Optics guarantees a lifetime warranty for all machine vision products, replaces the new ones for non-human factors within 2 years, and lifetime maintenance for all types of optical lenses.
How Does Machine Vision Work?
Machine vision is the application of a camera or several cameras to check and analyze objects automatically. Machine vision systems mainly depend on the digital sensors in industrial cameras. There are equipped with technical optics to obtain external vision, thus the computer can process, analyze, and measure various features for decision making. Machine vision is preferred to be applied in an industrial environment due to its high efficiency. Lots of manufacturers use automated machine vision instead of human inspectors because it is better suited to repetitive inspection tasks. It is faster, more objective, and works continuously.
Custom Machine Vision Lens & Illuminator From Canrill
Canrill catalog or product list on website only presents our most common models. Canrill also has an extensive of non-standard models in production. In addition, Canrill Optics offer customized machine vision lens or illuminators upon detailed request from customers. With rich experience both in optical design and mechanical engineering, and also our own optical factory and mechanical factory, Canrill is able to react fastest from design to prototype to mass production.
Canrill's record is 12 days to produce a complete imaging lens including design time.
Working Principle of Machine Vision System:
Lens Object FOV is a little larger than customer required FOV.
Lens Image FOV is equal or larger than camera sensor size.
Mag below 1X refers to low mag, above 1X refers to high mag.
There Are 3 Important Factors That Contribute In The Selection Process:
Image FOV, the sensor size of camera
Object FOV, the size of observed object
Working Distance
By image FOV and object FOV, the magnification of the lens can be acquired, that is image FOV/Object FOV.
Knowing the above, we can select a suitable lens optical from the existing product list.
Example:
Camera:1/2.5’-5MP
Sensor size: 5.7*4.3mm
FOV: 60*40mm
To pick a suitable lens, first to calculate the mag, 5.7/60=0.095X, 4.3/40=0.1075X.
Lower mag will be picked so as to cover full FOV.
From Canrill product line, Canrill fouth generation PTL series PTL-08 series is the most suiable, and the mag of XF-PTL09228 is 0.0847, is the closest figure to 0.095X.
Thus XF-PTL09228 is selected.
Machine Vision System Applications
Canrill Optics provides the machine vision illuminator and lens products usually used in guidance, inspection, gauging and identification.
Send product request
Other supplier products
 |
Point Illumination | Suitable for low mag lens coaxial lighting, uniform light spot, high brightness Specification Of Point Illumination Model Light Color Main... |
 |
The Difference Between a Telecentric Lens and a Normal Lens | What Is A Telecentric Lens? The telecentric industrial lens is a lens specially designed to correct the parallax of the traditional industrial len... |
 |
8k Line Scan (57.4mm) Telecentric Lens | Suitable for large format Area Scan Camera Line Scan Camera 16Kx3.5μm, 8Kx7μm, 8Kx5μm Adjustable iris makes it possible to balance DOF ... |
|
|
Products | To provide extensive optical solutions in machine vision optics systems, Canrill Optics, as a custom lens manufacturer, has been keeping developing... |
 |
Point Illumination | Suitable for low mag lens coaxial lighting, uniform light spot, high brightness Point IlluminationSpecification ... |
Same products
 |
flask | Seller: PakGent Bioscience (Suzhou) Co., Ltd. | Fit tips, DNase/RNase free, sterile, rack pack（78mm） PakGent UFPT-1000R-L Low Retention 1000ul M... |
 |
Lesinurad | Seller: Lepu Medical Technology(Beijing)Co.,Ltd | Lesinurad *Product registration and availability vary by country. For more information on prod... |
 |
LEN503 Nebulizer | Seller: Lepu Medical Technology(Beijing)Co.,Ltd | Cute pet caring Small atomized particles nebulizer machine for kids Adjustable atomizing cup H... |
 |
SINOART Shanghai Co., Ltd. | Seller: SINOART Shanghai Co., Ltd. | SINOART Shanghai Co., Ltd. is a combined industrial & trading company in China, specializing ... |
 |
High Voltage Surge Arresters | Seller: Guangdong Yufeng Industries Co.,Ltd | High voltage surge arresters, also called lightning arresters, are electrical devices designed to... |
