10G SFP+ CWDM
10G SFP+ CWDM
The 10g cwdm sfp+transceiver adopts DFB laser without refrigeration CWDM at the TX terminal, the wavelength ranges from 1270nm to 1610nm, and it adopts PIN at the receiving end. The maximum power consumption is less than 2W, compliants IEEE 802.3AE and SFF-8431 standards. Applications: 10 gigabit Ethernet, CPRI, Fibre Channel, SONET/SDH, etc. Contact GrenTechfor more 10g cwdm sfp+ info!
10G SFP+ CWDM Specification
|
Product Name |
10G SFP+ CWDM |
Vendor Name |
GrenTech |
|
Form Factor |
SFP+ |
Wavelength |
CWDM |
|
Max Data Rate |
Transmitter Distance |
10km/20km/40km/80km |
|
|
Cable Type |
SM |
Connector |
LC Duplex |
|
Transmitter |
DFB |
Receiver |
PIN |
|
DDM |
Supported |
Temperature Range |
0-70℃ |
|
Modulation Format |
NRZ |
FEC |
NO |
|
Power Consumption |
≤3.5W |
EMC |
Supported |
Send product request
Other supplier products
 |
100G QSFP28 CWDM4 | GrenTech 100GQSFP28 CWDM4multiplexes four wavelengths, 1270nm, 1290nm, 1310nm and 1330nm, to a single-mode fiber for transmission by coarse wave di... |
 |
10G SFP+ SR | 10G SFP+ SR GrenTech 10gb sfp+ sr transceiveradopts 850nm VCSEL laser to transmit up to 300m in OM3 sr multimodefiber. The OSA adopts COB technolo... |
 |
40G QSFP+ SR4 | GrenTech 40G QSFP+ SR4compliant with SFF-8436 and IEEE 802.3ba with a 4 channel VCSEL array and a 4 PIN array, the rate of a single channel is 10Gb... |
 |
10G SFP + ER | 10G sfp+ zrGrenTech 10G SFP+ 40km’s transmitter uses a cooling 1550nm EML laser, and receiver uses a PIN laser. The power consumption is less... |
 |
5G Base Station Miniaturized RF Filter | Due to the introduction of the Massive MIMO function, the installation position of the base station filter in the 5G base station has changed great... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
