2U DWDM/CWDM Optical Transport System

The integrated DWDM/CWDM platform of OTNS8600 II type optical transmission network system is mainly used in metro area nodes, and it solves the following shortage of fiber resources below the metro area network, completes a unified load and flat networking for multiple services in industries such as operators, Broadcast and TV system, IDC, finance, government, cloud, and big data.

It effectively reduces the network construction cost and operation cost and provides the best solution for the metro area transmission scenes. OTNS8600 II can cooperate with other Sintai Communication OTNS series products and implement networking according to the different requirements.

Product Features

The standard 2U rack type design fully adopts the way of outlet on the front panel, provides 7 service single-board slots, 1 network management single-board slot, and service slot, 1 fan single-board slot, and 2 power single-board slots, which are all pluggable.

It supports multiple services of STM-1/4/16/64 and services such as FE, GE, 10GE, 40GE, 100G, SAN, CPRI, and PON and meets the requirements of the multiple service access.

It supports the access of up to 32 bidirectional 10G services or 64 unidirectional 10G services on a single piece of equipment, and the expansion of transmission capacity to 960 Gbit/s is available through the equipment stack.

It supports application scenes of single fiber unidirectional, single fiber bi-direction, and dual fiber bi-direction.

It supports the maximum transmission distance of 130km (36 DB) for a single span and can realize long-distance transmission through the relay.

It supports various network protection solutions such as optical layer 1+1 channel protection or optical line side 1+1 protection, and provides multiple protection for vital equipment units and optical fiber lines, with high reliability.

It supports the power supply of 220V AC or -48V DC, with a 1+1 power input protection.

It supports 19 inches and ETSI cabinet, easy to layout, with strong suitability.

It supports free-of-configuration installation, and the equipment is plug-and-play.

It supports a unified network management platform and provides a perfect performance monitoring ability in the performance of networks and equipment.

It adopts a green energy-saving design, with a typical configuration of 120W power consumption.

It focuses on the metro area network and meets service access & convergence and networking.

Product Specification

Performance Parameters	Technical indicators
Product Model	OTNS8600 Ⅱ
Equipment size	2U: 88 mm (height)x442 mm (width)x220 mm (depth)
Service slot	8 slots (network card is optional for one of the slots)
Transmission capacity of Single equipment	32 wavelength* 10G bidirectional transmission 64 wavelength* 10G unidirectional transmission 4 wavelength* 10G unidirectional and bidirectional transmission
Wavelength	CWDM:1271nm~1611nm DWDM:C Band, 100 GHZ or 50 GHZ
The maximum rate of Single channel	100Gbit/ s
Transmission distance	For DWDM system, it supports the maximum transmission distance of 130km (36 DB) for a single span For CWDM system, it supports a maximum transmission distance of 80 km
Optical amplifier	25 DB (nominal gain)
Service interface type	STM-1/4/16/64, OC-3/12/48/192, FE, GE, GE, 40 10 GE, GE, FC100 100/200/400/200/400, FICON, ESCON, EPON and GPON, CPRI 1/2/3/6/7, etc
Clock features	Support the IEEE 1588 V2
Optical connector	SFP/SFP +, LC type interface
Network topology	Point to point, chain type, star type, ring type
Installation	"19"and "23" cabinets, ETSI 300mm/600mm cabinets Wireless outdoor base station cabinet, FTTx outdoor cabinet, hanging wall
Working temperature range	- 10 ℃~60 ℃ (typical)
Working humidity range	5~95% no condensation
Storage temperature range	-40℃～85℃
Heat dissipation	Fan cooling
Power supply mode	AC: 90~260V or DC: -36~-72 V (support 1+1 backup power input)
Power consumption	120W (typical)

As a professional wdm optical transceivers supplier, we provide optical communication devices, dwdm transponder, dwdm system architecture, cwdm solution, cwdm system, dwdm architecture, semiconductor optical amplifierand etc. For more information, please feel free to contact us!

Other supplier products

	16CH CWDM Mux Demux	CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the s...
	AWG Mux Demux	AWG Mux Demux 01- Athermal AWG Module The athermal Array Waveguide Grating Module (AWG) from Sintai is based on waveguide grating technology on the...
	40G QSFP+ Multimode Transceiver	Designed for 40G Ethernet and OTU3 links over multimode fibers, the Sintai 40G QSFP+ multimode optical transceivers use 850nm wavelength and suppor...
	Optical Splitter	01- FBT Coupler Splitter FBT wdm splitteris an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power an...
	Optical Communication Products	Achieving high bandwidth for end-to-end fiber transport networks. With the rapid development of optical communication industry, the demand in lo...

All supplier products

Same products

	HS 2311 Plastic Die Steel	Seller: Jiangsu Hongsheng Heavy Industry Group Co.,Ltd	There are steel equivalents of different materials in the market, including s136 steel equivalent...
	HOT WORK DIE STEEL	Seller: Jiangsu Hongsheng Heavy Industry Group Co.,Ltd	As one of the die steel manufacturers, we supply high quality hot work die steelto meet the requi...
	Forged Round Steel Bar	Seller: Jiangsu Hongsheng Heavy Industry Group Co.,Ltd	Forged steel round bar is made in cylindrical shape, which can be shaped in direct forging or re-...
	Disk / Flange Forging Component	Seller: Jiangsu Hongsheng Heavy Industry Group Co.,Ltd	The basic process used for disk forgings is upsetting, and then chamfering, rounding, and levelin...
	DIE STEEL (MOULD STEEL)	Seller: Jiangsu Hongsheng Heavy Industry Group Co.,Ltd	Die steel products are used to make molds of cold punching, hot forging and die casting, etc. It ...