2U DWDM/CWDM Optical Transport System
The integrated DWDM/CWDM platform of OTNS8600 II type optical transmission network system is mainly used in metro area nodes, and it solves the following shortage of fiber resources below the metro area network, completes a unified load and flat networking for multiple services in industries such as operators, Broadcast and TV system, IDC, finance, government, cloud, and big data.
It effectively reduces the network construction cost and operation cost and provides the best solution for the metro area transmission scenes. OTNS8600 II can cooperate with other Sintai Communication OTNS series products and implement networking according to the different requirements.
Product Features
The standard 2U rack type design fully adopts the way of outlet on the front panel, provides 7 service single-board slots, 1 network management single-board slot, and service slot, 1 fan single-board slot, and 2 power single-board slots, which are all pluggable.
It supports multiple services of STM-1/4/16/64 and services such as FE, GE, 10GE, 40GE, 100G, SAN, CPRI, and PON and meets the requirements of the multiple service access.
It supports the access of up to 32 bidirectional 10G services or 64 unidirectional 10G services on a single piece of equipment, and the expansion of transmission capacity to 960 Gbit/s is available through the equipment stack.
It supports application scenes of single fiber unidirectional, single fiber bi-direction, and dual fiber bi-direction.
It supports the maximum transmission distance of 130km (36 DB) for a single span and can realize long-distance transmission through the relay.
It supports various network protection solutions such as optical layer 1+1 channel protection or optical line side 1+1 protection, and provides multiple protection for vital equipment units and optical fiber lines, with high reliability.
It supports the power supply of 220V AC or -48V DC, with a 1+1 power input protection.
It supports 19 inches and ETSI cabinet, easy to layout, with strong suitability.
It supports free-of-configuration installation, and the equipment is plug-and-play.
It supports a unified network management platform and provides a perfect performance monitoring ability in the performance of networks and equipment.
It adopts a green energy-saving design, with a typical configuration of 120W power consumption.
It focuses on the metro area network and meets service access & convergence and networking.
Product Specification
|
Performance Parameters |
Technical indicators |
|
Product Model |
OTNS8600 Ⅱ |
|
Equipment size |
2U: 88 mm (height)x442 mm (width)x220 mm (depth) |
|
Service slot |
8 slots (network card is optional for one of the slots) |
|
Transmission capacity of Single equipment |
32 wavelength* 10G bidirectional transmission 64 wavelength* 10G unidirectional transmission 4 wavelength* 10G unidirectional and bidirectional transmission |
|
Wavelength |
CWDM:1271nm~1611nm DWDM:C Band, 100 GHZ or 50 GHZ |
|
The maximum rate of Single channel |
100Gbit/ s |
|
Transmission distance |
For DWDM system, it supports the maximum transmission distance of 130km (36 DB) for a single span For CWDM system, it supports a maximum transmission distance of 80 km |
|
Optical amplifier |
25 DB (nominal gain) |
|
Service interface type |
STM-1/4/16/64, OC-3/12/48/192, FE, GE, GE, 40 10 GE, GE, FC100 100/200/400/200/400, FICON, ESCON, EPON and GPON, CPRI 1/2/3/6/7, etc |
|
Clock features |
Support the IEEE 1588 V2 |
|
Optical connector |
SFP/SFP +, LC type interface |
|
Network topology |
Point to point, chain type, star type, ring type |
|
Installation |
"19"and "23" cabinets, ETSI 300mm/600mm cabinets Wireless outdoor base station cabinet, FTTx outdoor cabinet, hanging wall |
|
Working temperature range |
- 10 ℃~60 ℃ (typical) |
|
Working humidity range |
5~95% no condensation |
|
Storage temperature range |
-40℃～85℃ |
|
Heat dissipation |
Fan cooling |
|
Power supply mode |
AC: 90~260V or DC: -36~-72 V (support 1+1 backup power input) |
|
Power consumption |
120W (typical) |
As a professional wdm optical transceivers supplier, we provide optical communication devices, dwdm transponder, dwdm system architecture, cwdm solution, cwdm system, dwdm architecture, semiconductor optical amplifierand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
10G C/DWDM Transponder | 10G OTU service card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rates. Its main function is t... |
 |
100G OTN Muxponder | OTNS8600 100G OTN is a 10x10G service convergence platform launched by Sintai Communication Co., Ltd. It uses industry-leading chip technology, sup... |
 |
18CH CWDM Mux Demux | The CWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communications Co., Ltd. is designed for economical and efficient multi-wavelength ... |
 |
Integrated WDM System | The integrated WDM System offers 1U 48X10G→480G System and 1U 12X100G→1.2T System which supports single-channel access rate up to 10 Gbit... |
 |
16CH CWDM Mux Demux | CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the s... |
Same products
 |
乌克兰大口径液氮容器KGSQ氮气罐 | 卖方: 河南天之道生物科技有限公司 | 在生物样本中心或科研机构，有大量的细胞，菌种和疫苗等样本需要进行低温保存。这些样本科研意义重大，安全不可忽视，再加上有批量管理和数据收集需求。通常会选择气相液氮罐而不是航空铝制杜瓦。 气相液氮... |
 |
柬埔寨气相液氮罐KGSQ液氮容器 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在生物样本中心或科研机构，有大量的细胞，菌种和疫苗等样本需要进行低温保存。这些样本科研意义重大，安全不可忽视，再加上有批量管理和数据收集需求。通常会选择气相液氮罐而不是航空铝制杜瓦。 气相液氮... |
 |
Powered Hydraulic Shop Press | 卖方: Jiaxing Ouya Machinery Manufacturing Co., Ltd. | Jiaxing Ouya Machinery Manufacturing Co., Ltd. is a manufacturer specializing in the production o... |
 |
Electroplated Tools | 卖方: Henan E-Grind Abrasives Co., Ltd. | Henan E-Grind Abrasives Co., Ltd. produces electroplated tools by plating diamond or CBN grains w... |
 |
Electroplated Diamond Tools | 卖方: Henan E-Grind Abrasives Co., Ltd. | Electroplated diamond drill bitscan be made in various shapes, so it will be an excellent option ... |
