40km Dispersion Compensation Fiber
In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e.g., a long span of transmission fiber.
Typically, such a module provides a fixed amount of dispersion (e.g. normal dispersion in the 1.6-μm spectral region), although tunable dispersion modules are also available.
A module can easily be inserted into a fiber-optic link because it has fiber connectors for the input and output. The insertion losses may be compensated with a fiber amplifier, e.g. an erbium-doped fiber amplifier in a 1.5-μm telecom system. A dispersion-compensating module is often placed between two fiber amplifiers.
40km Dispersion Compensation Fiber Dispersion Compensation Principle
Dispersion is one of the transmission properties of the optical fiber, and the optical pulse signal will be broadened in time after transmission in the optical fiber for a distance, which produces inter-symbol interference, thus increasing the error rate and affecting the quality of communication.
The higher the data rate is, the more easily the inter-symbol interference will present.
The longer the transmission distance is, the more easily the inter-symbol interference will present.
40km Dispersion Compensation Fiber Feature
100% slope compensation of G.652 fiber in C-band ( Typical )
Low insertion loss
Low polarization mode dispersion
Wideband dispersion compensation
Compensation up to 40 km
Completely passive—no powering utilized
Telcordia GR-2854-CORE, ROHS compliant
40km Dispersion Compensation Fiber Specification
|
Product Model |
DCF40A |
|
Equivalent G.652 compensation length |
40km |
|
1545nm wavelength dispersion(ps/nm) |
-670±30 |
|
1545nm wavelength relative dispersion slope |
|
|
Insertion loss |
≤4.8 dB |
|
Polarization mode dispersion |
≤0.9 ps |
|
Nominal single-wave input optical power |
≤0 dBm |
|
Optical interface |
All interfaces are LC type |
|
Typical power consumption |
0W (passive components) |
|
MTBF |
> 200000 hours |
|
Occupied slot number |
2 slots (dispersion compensation board over 40km need to be configured individually with the DCF passive frame) |
As a professional wdm optical transceivers supplier, we provide china optical, dwdm transponder, edfa amplifierand etc. For more information about dispersion compensating fiber pdf and dispersion compensation techniques, please feel free to contact us!
Send product request
Other supplier products
 |
5x10G Transponder | 10G OTU service card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rates. Its main function is t... |
 |
18CH DWDM Mux Demux | The DWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communication Co., Ltd. is designed for multi-wavelength demux application. It work... |
 |
Optical Splitter | 01- FBT Coupler Splitter FBT wdm splitteris an optical splitter that uses the Fused Biconical Taper (FBT) technique for splitting optical power an... |
 |
16CH CWDM Mux Demux | CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the s... |
 |
5G Fronthaul Semi-Active WDM System | The 5G fronthaul transmission semi-active WDM system launched by Guangzhou Sintai Communication Co., Ltd. is mainly used to solve the problem of la... |
Same products
 |
Ukraine large diameter liquid nitrogen container KGSQ nitrogen tanks | Seller: Henan Tianzhidao Biological Technology Co., Ltd | In biological sample centers or scientific research institutions, there are a large number of cel... |
 |
Cambodia gas-phase liquid nitrogen tanks KGSQ liquid nitrogen container | Seller: Henan Tianzhidao Biological Technology Co., Ltd. | In biological sample centers or scientific research institutions, there are a large number of cel... |
 |
OY2004 | Seller: Jiaxing Ouya Machinery Manufacturing Co., Ltd. | Jiaxing Ouya Machinery Manufacturing Co., Ltd. is a manufacturer specializing in the production o... |
 |
Electroplated Tools | Seller: Henan E-Grind Abrasives Co., Ltd. | Henan E-Grind Abrasives Co., Ltd. produces electroplated tools by plating diamond or CBN grains w... |
 |
Electroplated Diamond Tools | Seller: Henan E-Grind Abrasives Co., Ltd. | Electroplated diamond drill bitscan be made in various shapes, so it will be an excellent option ... |
