40km Dispersion Compensation Fiber
In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e.g., a long span of transmission fiber.
Typically, such a module provides a fixed amount of dispersion (e.g. normal dispersion in the 1.6-μm spectral region), although tunable dispersion modules are also available.
A module can easily be inserted into a fiber-optic link because it has fiber connectors for the input and output. The insertion losses may be compensated with a fiber amplifier, e.g. an erbium-doped fiber amplifier in a 1.5-μm telecom system. A dispersion-compensating module is often placed between two fiber amplifiers.
40km Dispersion Compensation Fiber Dispersion Compensation Principle
Dispersion is one of the transmission properties of the optical fiber, and the optical pulse signal will be broadened in time after transmission in the optical fiber for a distance, which produces inter-symbol interference, thus increasing the error rate and affecting the quality of communication.
The higher the data rate is, the more easily the inter-symbol interference will present.
The longer the transmission distance is, the more easily the inter-symbol interference will present.
40km Dispersion Compensation Fiber Feature
100% slope compensation of G.652 fiber in C-band ( Typical )
Low insertion loss
Low polarization mode dispersion
Wideband dispersion compensation
Compensation up to 40 km
Completely passive—no powering utilized
Telcordia GR-2854-CORE, ROHS compliant
40km Dispersion Compensation Fiber Specification
|
Product Model |
DCF40A |
|
Equivalent G.652 compensation length |
40km |
|
1545nm wavelength dispersion(ps/nm) |
-670±30 |
|
1545nm wavelength relative dispersion slope |
|
|
Insertion loss |
≤4.8 dB |
|
Polarization mode dispersion |
≤0.9 ps |
|
Nominal single-wave input optical power |
≤0 dBm |
|
Optical interface |
All interfaces are LC type |
|
Typical power consumption |
0W (passive components) |
|
MTBF |
> 200000 hours |
|
Occupied slot number |
2 slots (dispersion compensation board over 40km need to be configured individually with the DCF passive frame) |
As a professional wdm optical transceivers supplier, we provide china optical, dwdm transponder, edfa amplifierand etc. For more information about dispersion compensating fiber pdf and dispersion compensation techniques, please feel free to contact us!
在线联系供应商
Other supplier products
 |
100G CFP DWDM Transceiver | The 100G CFP-DCO coherent optical transceiver launched by Guangzhou Sintai Communication Co., Ltd. adopts a standard CFP package and advanced modul... |
 |
Optical Amplifier System | Optical Amplifier Applications SINTAI Communication offers an EDFA amplifier and OEO repeater, Raman amplifier, SOA Semiconductor Amplifier. Th... |
 |
25G SFP28 Transceiver | 01- 25G SFP28 Single Mode Transceiver Designed for 25G Ethernet 25GBASE-LR and CPRI/eCPRI links over duplex single-mode fibers, the 25G SFP28 LR i... |
 |
40G QSFP+ Multimode Transceiver | Designed for 40G Ethernet and OTU3 links over multimode fibers, the Sintai 40G QSFP+ multimode optical transceivers use 850nm wavelength and suppor... |
 |
10 SFP+ C/DWDM Transponder | 10GTransponder 10G otn transponderservice card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rat... |
Same products
 |
Hexagonal Shaft | 卖方: NANJING LESUN SCREW CO.,LTD | Rectangular splines are mostly six splines. This type of spline is better than a single key and c... |
 |
Side Feeder Elements | 卖方: NANJING LESUN SCREW CO.,LTD | Side Feeder Elements This side extruder feed screwis to help the bulk materials that are fed into... |
 |
Screw Shaft | 卖方: NANJING LESUN SCREW CO.,LTD | Screw ShaftManufacturer Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wea... |
 |
Kneading Screw Elements | 卖方: NANJING LESUN SCREW CO.,LTD | Kneading Screw Elements Manufacturer Kneading ElementDiameter: φ20 mm ~φ300 mm Kneading b... |
 |
Mixing Rotor | 卖方: NANJING LESUN SCREW CO.,LTD | Good force pull on the material ,meanwhile the material can be fully distributed evenly without s... |
