FW INVERTING CENTRIFUGE
When the drum is under high-speed operation, the suspension enters the drum through the feeding pipe. Under the action of centrifugal force, the suspension is evenly distributed in the filter cloth of the drum. The liquid phase passes through the pore of filter cloth, the gap of screen mesh, and the filter hole of the drum and then is discharged from the outlet of the mother liquid pipe; while the solid phase is intercepted to form a ring filter slag layer on the filter mesh. When discharging, the main engine of inverting centrifuge first slows down to the discharging speed, then starts the discharging motor and pushes the pusher out of the drum. Because the two ends of the filter cloth turn over, and the retained material is turned to the outside of the filter cloth.
FW INVERTING CENTRIFUGE SPECIFICATION
FW Main technical parameter
Item / Model FW-630 FW-800 FW-1000 FW-1300
Drum diameter (mm) 630 800 1000 1300
Drum volume (L) 70 120 200 350
Filter area (m2) 0.56 0.85 1.26 2
Max. revolving Speed (r/min) 1940 1600 1270 1000
Max. Separating factor (N) 1325 1144 901 726
Weight of Machine (Kg) 3600 4200 5500 6500
Outline Size (mm) (L×W×H) 2970×1040×1650 3980×1450×1890 4990×1650×2560 5900×2050×3250
FW INVERTING CENTRIFUGE CHARACTERISTICS
1. Fully sealed structure design, reliable sealing, no pollution to materials
2. The shell can be completed and turned over for easy cleaning and inspection.
3. Discharge without scraper mechanical parts, no damage to grain crystal.
4. There is no material residue in the filter cloth, which is convenient for the separation of materials in the next batch.
5. Unmanned operation, automatic detection, and operation.
FW INVERTING FILTER CENTRIFUGEWORKING PRINCIPLE
After the start-up of the equipment, firstly judge whether the proximity switch of the motor end is effective or not. If not effective, the assist motor will work to seal the drum. After that, the assist motor will stop and the main motor start to run. After the drum reaches the set speed, the feeding valve will open and suspension will enter into the full-speed rotary drum filtration through the feeding pipe. Under centrifugal force, the solid of the suspension will be distributed evenly on the internal surface of the filter mesh and most of the liquid will pass through the small holes on the filter mesh and drum wall and be drained outside through the liquid outlet. After a long time operation, the thickness of the solid product inside the drum will keep gaining. When reaching the set time, the feeding valve will close automatically. (feeding time will be changed for different products and can be adjusted at first commissioning).
FW Performance and Use
FW series are inverting filter centrifuges with intermittent feeding and intermittent discharging.
Feeding, separating, washing, dehydration, and other operating procedures are completed under full speed; discharging is completed under the condition of deceleration, which avoids material contact with subject other than equipment, and can protect the operator and material from pollution as well.
The machine meets GMP specifications and is suitable for filtration and separation in pharmaceutical, food, and chemical industries.
As a professional industrial centrifuge machine factory, Saideli provides industrial centrifugal dryer, solid solid separation equipment, industrial centrifuge machineand etc. Want to know more, contact us.
Send product request
Other supplier products
 |
HR Pistons Pushing Centrifuge | When the drum runs at a full speed driven by the main motor and transmission belt, the suspension of HR pistons pusher centrifugewill be led to the... |
 |
GKH AUTOMATIC SIPHON HORIZONTAL SCRAPER CENTRIFUGE | This screen industrial centrifugeis controlled by PLC and regulates the speed by frequency convertor. The braking system of continuous horizontal c... |
 |
HORIZONTAL CENTRIFUGE MACHINE | The horizontal peeler centrifugemachine manufactured by Saideli is with high production capacity and separation performance is excellent. The horiz... |
 |
HR PISTONS PUSHING CENTRIFUGE | When the drum runs at a full speed driven by the main motor and transmission belt, the suspension of HR pistons pusher centrifuge will be led to th... |
 |
Industrial Centrifuge Separator Working Principle | INDUSTRIAL CENTRIFUGE SEPARATOR WORKING PRINCIPLE The industrial centrifuge working principleis fed tangentially to the cylindrical top of the cen... |
Same products
 |
Microcrystalline wax used for improving the flexibility of packaging materials | Seller: Syntop chemical Co.,Ltd. | Microcrystalline wax is a specialty wax extracted from petroleum. Its primary functions include t... |
 |
288 Holes Plastic Plant Trays | Seller: Hebei Marshine New Material Technology Co., Ltd. | 288 Holes Plastic Plant Trays 288 Holes Plastic Plant Trays of 288 holes are great for vege... |
 |
plastic bag | Seller: Hebei Marshine New Material Technology Co., Ltd. | plastic bag If you are a plant lover, you may have heard someone suggest putting a over a pl... |
 |
Seedling Tray Price Philippines - Marshine | Seller: Hebei Marshine New Material Technology Co., Ltd. | Seedling Tray Price Philippines - Marshine Seedling Tray Price Philippines - Marshine Find ... |
 |
Seedling Trays | Seller: Hebei Marshine New Material Technology Co., Ltd. | Seedling Trays Wholesale South Africa - Marshine Our seedling trays are exported to South A... |
