GS8500-EX Digital Intrinsic Safety Barrier
Digital input, relay output isolated barrier, transfers digital signals (dry contact or NAMUR proximity switch) from hazardous area to safe area. Each channel can be provided to select phase reversal and to enable line fault detection. And digital output isolated barrier, with 12V/45mA output to the hazardous area, is controlled by switches and logic signal in the safe area.
This intrinsically safe barrieris suitable for driving IS devices such as solenoid valves, LED and some other low-power loads located in the hazardous area. Digital input barrierneeds an independent power supply and galvanic isolation among power supply, input and output.
Advantages of ChenzhuGS8500-EX Digital Intrinsic Safety Barrier
Ultra-thin 12.5mm
High reliability and precision
Strong EMC performance
G3 anti-corrosion
Flexible power mode
Parameter of GS8500-EX Digital Intrinsic Safety Barrier
|
1/1: GS8512-EX.111/2: GS8512-EX.122/2: GS8512-EX/223/3: GS8512-EX.33 |
4/4：GS8114-EX |
|
|
Supply Voltage |
20~35V DC |
20~35V DC |
|
Current Consumption |
≤30mA(GS8512-EX.11)≤40mA(GS8512-EX.12 / GS8512-EX.22)≤65mA(GS8512-EX.33） |
≤75mA |
|
Open circuit voltage |
≈8V |
≈8V |
|
Short-circuit Current |
≈8mA |
≈8mA |
|
Input signal |
Dry contact or NAMUR proximity switch |
Dry contact/proximity switch |
|
Output signal |
Relay |
Relay |
|
Relative humidity |
10%~90% |
10%~90% |
|
Response time |
≤10ms |
≤20ms |
|
Ambient Temperature |
-20℃~+60℃ |
-20℃~+60℃ |
|
Weight |
|
1/1：GS8519-EX.111/2：GS8519-EX.122/2：GS8519-EX.22 |
1/2：GS8519-EX.12AWith LFD function |
|
|
Supply Voltage |
20~35V DC |
20~35V DC |
|
Current Consumption |
≤40mA(GS8519-EX.11)≤60mA(GS8519-EX.12 / GS8519-EX.22) |
≤40mA |
|
Open circuit voltage |
≈8V |
≈8V |
|
Short-circuit Current |
≈8mA |
≈8mA |
|
Input signal |
Dry contact/proximity switch |
Dry contact/proximity switch |
|
Output signal |
Transistor |
Relay |
|
Digital Output |
|
|
|
Relative humidity |
10%~90% |
10%~90% |
|
Ambient Temperature |
-20℃~+60℃ |
-20℃~+60℃ |
|
Weight |
|
1/2：GS8515-EX |
|
|
Supply Voltage |
20~35V DC |
|
Current Consumption |
≤50mA |
|
Control Input |
ON/OFF control(9，10)Upper limit/lower limit control(9，10，11) |
|
Input signal |
Dry contact/proximity switch |
|
Output signal |
Relay |
|
Input signal |
Dry contact/proximity switch |
|
Response time |
≤20ms |
|
Ambient Temperature |
-20℃~+60℃ |
|
Weight |
Approx 150g |
Send product request
Other supplier products
 |
Power Transmitter | Power transmittercan transfer complicated current like 0~1A/0~5A/0~10A into industry-standard output, adopting the true RMS detection technology. W... |
 |
DC Power SPD | dc power surge protector dc spd 1000v dc surge protector solar solar dc spd dc surge arrestor？ surge arrester dc dc surge suppressor dc spd ... |
|
|
AC Power SPD | The power surge protector for power surge ac unitis designed to prevent transient surge conditions. Large single surge events, such as lightning, c... |
 |
T series AC Power SPD | The power surge protector for AC unit is designed to prevent transient surge conditions. Large single surge events, such as lightning, can reach hu... |
 |
CZ2000 Series Signal Conditioner | CZ2000 range signal conditioners use high-efficiency electromagnetic isolation technology to achieve reliable galvanic isolation among power supply... |
Same products
 |
MONSA® DDAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | Seller: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
Common Rail Injector | Seller: DIP (DIESEL INJECTION PARTS) PLANTS | Item: Diesel Fuel Injector Model No: MOQ: 1pc Material: SteelPackage Deta... |
