Car seat dynamic comfort tester
Applicable standards:
QC/T 55-1993 "Test Standards and Methods for Dynamic Seat comfort" : This standard specifies the test items, test equipment, test procedures and data processing methods of dynamic seat comfort test. It is the main reference for the design, manufacture and use of the dynamic comfort tester for car seats
Main parameters:
Vertical displacement: usually expressed as the maximum moving distance of the tester in the vertical direction, generally about 200mm. This parameter determines the seat vibration amplitude that the tester can simulate.
Vertical frequency: The vibration frequency range of the tester in the vertical direction, usually 0.5——20Hz. This parameter reflects the range of seat vibration frequencies that the tester is able to simulate and is critical for evaluating the seat's comfort at different frequencies.
Displacement amplifier: The tester is usually equipped with a displacement amplifier to adjust the vibration amplitude. The common displacement amplifier gear is 100%, 50%, 20%, etc., and the accuracy is ±1%FS of the full range （from 20% of the full range）。
Acceleration range: The maximum acceleration value that the tester can measure, generally about 5g （5 times the acceleration of gravity）。 This parameter determines the ability of the tester to simulate high acceleration vibration.
Acceleration sensitivity: The degree to which the tester is sensitive to changes in acceleration, usually less than 5%. This parameter affects the accuracy and reliability of the measurement results of the tester.
Vibration table speed: The maximum moving speed of the tester vibration table, generally about 1.3m/s. This parameter determines the response speed of the tester when simulating seat vibration.
Maximum load: The maximum weight that the tester can carry, usually about 150kg. This parameter determines the type and size range of seats that the tester can test.
Send product request
Other supplier products
 |
Ross Flex Tester | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials... |
 |
Fabric Heat Conduction Performance Tester | The instrument is mainly used for the determination of textiles, fire supplies and other materials thermal conductivity.StandardsEN 367-1992 Protec... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification: ... |
 |
Battery impact tester | Product introduction The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross positio... |
 |
Car seat headrest static strength tester | Applicable standards: GB 11550-2009 "Automobile seat headrest strength requirements and test methods" : This standard specifies the static strengt... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
