Low - temperature Winding Tester for Automotive Wires
The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular insulated wire cores in low - temperature conditions.
Test Standards:
ISO 6722, ISO 14572, ISO 19642, SAE J1128, QC/T 730, JASOD611 - 2009, etc.
Main Parameters:
1) Low - temperature winding sample: less than 25mm² 2) Diameter of winding rod: Φ6, 8, 10, 12, 15, 18, 20, 25, 30, 32, 40, 50, 58, 62.5, 74, 82.5, 90, 98.5mm (optional) 3) Weight weights: 0.5, 2.5, 5, 8, 10kg and combined weights: 4 pieces of 10kg (Note: for large loads such as 30KG weight test, two samples are used in one group) 4) Number of winding turns of the sample: 3 turns 5) The winding rods and brackets of this series of devices are made of stainless steel.
Electric Controller of Low - temperature Winding Test Device for Automotive Wires:
1. Servo motor: 1500W 2. Controller: PLC + touch screen 3. Winding speed: up to 130 revolutions per minute (set on the touch screen) 4. The number of winding turns can be set (set on the touch screen)
Send product request
Other supplier products
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9, MIL-W-81381A, MIL-T-5438 and ISO R1220, 1491 and other standards Main parameters: 1, sand belt length counting ... |
 |
Ruhr conical joint multi-function tester | Product introduction It is mainly used to test the leakage, gas, separation force, unscrewing torque, easy assembly, resistance to slip wire, ... |
 |
Leather Vamp Flexing Extensibility Testing Machine | Introduction: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also be... |
 |
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire | In terms of main parameters: The vibration frequency of the vibrating table is 10Hz, the amplitude is 6.35±0.25mm, and the vibration directi... |
 |
Scratch-resistance testing machine for low voltage wire and cable for road vehicles | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
