Automotive wire abrasion testing machine
Applicable standards:
ISO 6722, OC/T730, JIS C 3046, JASO D 611.SAEJ1128-2005, JBT 8139 TBT 1484.1-2001 Part1.EN50305, EN50306 and other standards
Main parameters:
1, the test stroke is greater than 10mm, the scraper displacement :20mm+1mm, the scraping length :15.5±1mm
2, movement frequency :50——60 cycles/minute （touch screen set）
3, counter :6 bits （touch screen setting）
4. Test times :6 times （touch screen setting）
The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle is 90°
6, sample length: about 750mm sample firmly fixed on a steel anvil
7, weight: basic load :4N, plus :5N, 6N, 7N, 8N, 9N, 10N, 11N（applied to the scraper on the weight）
8, with function: when the needle wears through the insulation and conductor contact, the equipment will stop
9, the scraping needle movement according to the "U" shape, to avoid the sample unilateral effort caused by the phenomenon of unilateral easy to be scratched through,
10, the diameter of the scraper :0.45mm+0.01mm（spring wire）
11, the test temperature monitoring function: the test environment temperature is not within the range of 23℃+1℃， the testing machine can not start or run automatically stop.
12, control system: servo motor, touch screen +PLC（imitation Ruitu imported model）
13. Transmission mechanism: imported double slide rail type
14, equipped with plexiglass test samples to prevent environmental temperature fluctuations can be affected by the test.
Send product request
Other supplier products
 |
Air-cooled Xenon Lamp Aging Tester | The air-cooled xenon lamp aging tester is a device that uses an air-cooled system to dissipate heat and a xenon lamp to simulate ultraviolet light,... |
 |
VW-1 wire and cable burning tester | Product introduction VW-1 wire and cable burning tester is suitable for measuring the resistance of wire, cable or rope to flame horizontal p... |
 |
High - voltage DC Stability Tester | The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the va... |
 |
Automobile wire cutting tester | Product Introduction: Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is the ... |
 |
Ethylene Oxide Residual Gas Chromatograph | The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica... |
Same products
 |
Pipe clamp | Seller: Yuhuan Jinyi Hardware Co., Ltd. | It is designed for secure and stable installation of various pipe systems. Featuring a robust two... |
 |
Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 | Seller: zhonglutong | Automotive nozzles 0 433 175 510 Automotive nozzles 0433171654 Automotive nozzles 0433171719 Auto... |
 |
Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 | Seller: zhonglutong | Automotive nozzles 0 433 175 470 Automotive nozzles 0 433 175 481 Automotive nozzles 0 433 175 51... |
 |
Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 | Seller: zhonglutong | Automotive nozzles 0 433 175 395 Automotive nozzles 0 433 175 413 Automotive nozzles 0 433 175 42... |
 |
Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 | Seller: zhonglutong | Automotive nozzles 0 433 175 294 Automotive nozzles 0 433 175 333 Automotive nozzles 0 433 175 36... |
