Rail transit car wire abrasion testing machine
Applicable standards:
GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below
Main parameters:
The test stroke is greater than 10mm, the displacement of the scraping needle is 20mm+1mm, and the scraping length is 15.5±1mm
Movement frequency :50——60 cycles/min （touch screen setting）
Counter :6 bits （touch screen setting）
Test times :6 times （touch screen setting）
The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle is 90°
Sample length: about 750mm sample firmly fixed on a steel anvil
Combined load :0.8Kg .9Kg1.0Kg1.1kg（weight applied to the scraper）
Function: When the needle wears through the insulation and conductor contact, the equipment will stop
The scraping needle movement according to the "U" shape, to avoid the phenomenon that the unilateral side of the sample is easy to be scratched through
Needle diameter :0.45mm+0.01mm（spring wire）
Test temperature monitoring function: test ambient temperature is not within the range of test requirements,
Testing machine can not start or run automatically stop
Control system: servo motor, touch screen +PLC（imitation Swiss imported model）
Transmission mechanism: imported double slide rail type
Equipped with plexiglass test samples to prevent ambient temperature fluctuations can be affected by the test
Send product request
Other supplier products
 |
Horizontal Vertical Combustion Tester | IntroductionHorizontal and vertical combustion testeris to simulate the early situation of a fire around the electrical environment .By simulating ... |
 |
Car seat component clearance test bench | Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-2008 ... |
 |
Mask Leakage Tester | Synthetic Blood Penetration TesterThe Mask Integrity Test Accessory (Qinsun) works in tandem with the CBRN Mask Protection Assessment Test System o... |
 |
Car seat foam performance tester | Applicable standards: GB/T 6670-2008 "Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the tes... |
 |
Dry Penetration Tester | Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles.... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
