Rail transit car wire abrasion testing machine
Applicable standards:
GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below
Main parameters:
The test stroke is greater than 10mm, the displacement of the scraping needle is 20mm+1mm, and the scraping length is 15.5±1mm
Movement frequency :50——60 cycles/min （touch screen setting）
Counter :6 bits （touch screen setting）
Test times :6 times （touch screen setting）
The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle is 90°
Sample length: about 750mm sample firmly fixed on a steel anvil
Combined load :0.8Kg .9Kg1.0Kg1.1kg（weight applied to the scraper）
Function: When the needle wears through the insulation and conductor contact, the equipment will stop
The scraping needle movement according to the "U" shape, to avoid the phenomenon that the unilateral side of the sample is easy to be scratched through
Needle diameter :0.45mm+0.01mm（spring wire）
Test temperature monitoring function: test ambient temperature is not within the range of test requirements,
Testing machine can not start or run automatically stop
Control system: servo motor, touch screen +PLC（imitation Swiss imported model）
Transmission mechanism: imported double slide rail type
Equipped with plexiglass test samples to prevent ambient temperature fluctuations can be affected by the test
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Leather Vamp Flexing Extensibility Testing Machine | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
labratory gas fume chamber | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Luggage rod reciprocating fatigue testing machine | Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stre... |
 |
AKRON abrasion testing machine | Product Introduction: AKRON wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles,... |
 |
Carbon Arc Aging Chamber | Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet rays, temperature, humidity and other factors in natural... |
Похожие товары
 |
FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | Продавец: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Продавец: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
