Bettersizer 2600
Laser Particle Size Analyzer (Dry & Wet Dispersions)
The Bettersizer 2600 utilizes this laser diffraction technology. There are 92 photoelectric detectors to convert light signals from the scattering spectrum to electrical signals, which are transmitted into an intelligent software. By implementing the Mie scattering theory to the data and performing mathematical conversion, the complete particle size distribution can be derived.
Measurement: Particle size
Particle size range:
Wet dispersion: 0.02 to 2600μm
Dry dispersion: 0.1 to 2600μm
Dispersion type: Wet and Dry
Technology: Laser diffraction
Precise measurement of both large and small particles covering the broadest range by a new patented technology utilizing both Fourier and Reverse Fourier optical systems
Optical bench with 92 detectors covering an angular range of 0.016° - 165°
Optional wet and/or dry dispersion
Small volume dry dispersing module for small sample quantities especially for pharmaceutical or valuable samples in short supply
Easy and fast to changeover between dispersing modules
Easy to implement, create and use Standard Operation Procedures for new materials
Automatic alignment of the optical system
User-friendly software, easily learnt
The Fundamentals of Bettersizer 2600
Sample Dispersion Modules |
BT-802 |
Wet Small Volume |
BT-80N |
BT-902 |
BT-903 |
Sample Dispersion |
Wet sample dispersion |
Wet small volume sample dispersion |
Anti-corrosive sample dispersion |
Dry sample dispersion |
Dry small volume sample dispersion |
Dispersion Modules |
|||||
Combine with Main Device |
|||||
Volume |
600mL (dispersion medium) |
8mL(dispersionmedium) |
80mL(dispersionmedium) |
||
Automation |
Full-automated |
Semi-automated |
Semi-automated |
Full automated |
Full automated |
Application Notes
Overview
Features
1)FOURIER AND REVERSE FOURIER OPTICAL SYSTEM
The Bettersizer 2600 is superior in the combination of Fourier and inverse Fourier design. This smart design allows, on the one hand, the detection of stray light in a very wide angular range from 0.016° to 165°. On the other hand, in contrast to the inverse Fourier design, the particles do not have to lie on one plane – the simultaneously accurate measurement of small and large particles is therefore achieved.
Features of combination of Fourier and inverse Fourier design
Spherical detector array: Forward, lateral and backward detectors in 92 pieces in total;
Super large Fourier lens;
Small footprint: Compact design to save space
2)INTUITIVE AND POWERFUL SOFTWARE
Intuitive operation and orderly user interface
Real-time mode for determining the optimal measurement conditions
Fully automatic measurement routine
Automatic cleaning routine
Automatic data backup and highly customizable reports
Direct conversion according to Fraunhofer and Mie evaluation models
Switch between wet and dry dispersion modules with one click
3)WET DISPERSION
BT-802 is designed for particle size measurement with water as the medium.
BT-802 is made up of ABS shell. The components of it include centrifugal pump, peristaltic pump, ultrasonic disperser, pinch valve, control circuit, etc. The stirring speed is adjustable from 500 - 2500 rpm. Built-in ultrasonic system (50 W) ensures stable dispersion of samples.
BT-80N is designed for particle size measurements with organic solvents as the media. BT-80N is suitable for common organic solvents, for example:
BT-80N is made up of stainlesssteel shell. The components of it include centrifugal pump, ultrasonic disperser, PTFE pipeline, sintered-quartz sample cell, control circuit, etc.
Wet Small Volume Dispersion Module is designed for valuable or small-volume sample measurements, where the medium is solvent or water. The module consists of ABS shell, stirring motor, cuvette (8 ml), stirrer, etc.
Maximum volume in 8 mL with samples mass in 0.005 - 0.1 g.
Suitable for samples dispersed in water or organic phase.
4)DRY DISPERSION
BT-902 is suitable for dry powders particle size measurements. The gas used can be compressed air, nitrogen or other noble gases.
BT-902 is made up of electromagnetic vibration feeder, venturi pipe, gas circuit, electric circuit, pressure sensor, etc.
BT-903 is designed for particle size measurements of valuable and small amount dry powders with a minimum samples volume of 20 mg.
BT-903 is composed of venturi pipe, gas circuit, electric circuit, samples tube, etc.
5)APPLICATIONS OF BETTERSIZER 2600 PARTICLE SIZE ANALYSER
Performance
Resolution and sensitivity
The resolution and sensitivity of Bettersizer 2600 laser granulometryas verified as below: sample A was gradually added to sample B, the graphs change correspondingly.
Sample A < Sample B
Sample A = Sample B
Sample A > Sample B
SOP
Standard Operating Procedure (SOP)
SOP settings include water intake, bubble removal, background and obscuration measurement, testing, cleaning, and result saving and printing.
Advantages
The Bettersizer 2600 offers an easy solution for standardized and automatic testing.
It ensures the measurement results operator-independent, making the results more objective and reliable.
Technology
Specification
Bettersizer2600 |
|
Parameters measured |
Materials |
Particle size distribution |
Suspensions, emulsions, dry powders |
General |
|
Principle |
Laser light scattering |
Analysis |
Mie and Fraunhofer scattering |
Typical measurement time |
Less than 10 seconds |
Measurement performance |
|
Measuring range |
|
Accuracy error |
≤ 0.5% * |
Repeatability |
≤ 0.5% * |
Reproducibility |
≤ 0.5% * |
Number of size classes |
100 (user adjustable) |
Feeding mode |
Automatic circulation or micro cuvette (wet) Gas transportation (dry) |
Special functions |
SOP settings, refractive index measurement, sample ratio calculation |
Main device |
|
Optical system |
Combined Fourier and inverse Fourier & Tilted sample cell |
Laser |
High-power optical fiber laser (10 mW / 635 nm) |
Detector |
92 detectors (forward, lateral and backward arrangements) |
Measuring angle |
|
Wet dispersion module |
|
Measurement method |
One-click operation (automated measurement, cleaning, saving, printing, etc.) |
Dispersion medium |
Water or organic solvents (sample dependent) |
Circulation speed |
500-2500 r/min |
Circulation flow |
3000 – 8000 ml/min |
Ultrasonication |
Dry burning prevention,50 W |
Dry dispersion module |
|
Dispersion medium |
Air/ Nitrogen/Noble gas |
Air pressure |
|
Gas flow |
400 – 6000 L/min |
Software |
|
Conformity |
21 CFR Part 11, ISO 13320, USP <429>, CE |
Reports |
Customizable reporting |
System parameters |
|
Dimensions (L x W x H) |
|
Weight |
23 kg |
Supply voltage |
100/240V, 50/60 Hz |
Computer configuration (recommended) |
|
Computer interface |
At least one high speed USB 2.0 or USB 3.0 port required |
Operating system |
Windows 7 (32 bit and 64 bit) or higher |
Hardware specification |
Intel Core i5 Processor, 4GB RAM, 250GB HD, Wide screen monitor |
*Sample and sample preparation dependent |
At Bettersize, our mission is to provide best-in-class particle sizing and characterization instruments, comprehensive solutions and exceptional customer services. We provide particle measuring services, particle size instrumentand etc. Want to know particle sizer priceor more? Please contact us.
Send product request
Other supplier products
Bettersizer ST | Bettersizer ST The Bettersizer ST is an automated laser scattering particle size distribution analyzerdesigned for industrial quality control. I... | |
BeDensi T Series | Tapped Density Meter BeDensi T series Tapped Density Meter Apparatus includes BeDensi T1 (one cylinder), BeDensi T2 (two cylinders) and BeDensi T3 ... | |
Bettersizer 2600 | Laser Particle Size Instrument(Dry & Wet Dispersions) The Bettersizer 2600 utilizes this laser diffraction technology. There are 92 photoele... | |
Particle Shape | The properties of particles include particle size, shape, surface structure and pore structure. The shape of the particles can impact on many prope... | |
BeVision D2 | Dynamic Image Particle Analyzer with Dry Dispersion The BeVision D2 particle image analyzer(particle shape analyzer) is a microscopic image partic... |
Same products
Biomass Pellet | Seller: Jiangsu Kingwood Industrial Co., Ltd. | 前庭过程生物质颗粒中的冲击变化 木质素结构生物质 Lignum est una e multis rudibus materiis commter adhibitis in globulos... | |
TrusFIL Dental Composite Restorative | Seller: Shandong Huge Dental Material Corporation | TrusFIL Dental CompositesRestorative Provides a series of high-strength and multi-color composit... | |
Traditional Heat Curing | Seller: Shandong Huge Dental Material Corporation | Traditional Heat Curing For making denture bases, HUGE offers a series of Denture Base Polymers ... | |
TopCEM-Veneer Light Cure Veneer Cement | Seller: Shandong Huge Dental Material Corporation | TopCEM-Veneer Light Cure Veneer Cement Meet diverse needs with impressive esthetic results and g... | |
TopCEM Try-in Veneer Try-in Gel | Seller: Shandong Huge Dental Material Corporation | TopCEM Try in Paste for VeneersTry-in Gel Used to evaluate the shade and the matching of the res... |