Bettersizer 2600

Laser Particle Size Analyzer (Dry & Wet Dispersions)

The Bettersizer 2600 utilizes this laser diffraction technology. There are 92 photoelectric detectors to convert light signals from the scattering spectrum to electrical signals, which are transmitted into an intelligent software. By implementing the Mie scattering theory to the data and performing mathematical conversion, the complete particle size distribution can be derived.

Measurement: Particle size

Particle size range:

Wet dispersion: 0.02 to 2600μm

Dry dispersion: 0.1 to 2600μm

Dispersion type: Wet and Dry

Technology: Laser diffraction

Precise measurement of both large and small particles covering the broadest range by a new patented technology utilizing both Fourier and Reverse Fourier optical systems

Optical bench with 92 detectors covering an angular range of 0.016° - 165°

Optional wet and/or dry dispersion

Small volume dry dispersing module for small sample quantities especially for pharmaceutical or valuable samples in short supply

Easy and fast to changeover between dispersing modules

Easy to implement, create and use Standard Operation Procedures for new materials

Automatic alignment of the optical system

User-friendly software, easily learnt

The Fundamentals of Bettersizer 2600

Sample Dispersion Modules	BT-802	Wet Small Volume	BT-80N	BT-902	BT-903
Sample Dispersion	Wet sample dispersion	Wet small volume sample dispersion	Anti-corrosive sample dispersion	Dry sample dispersion	Dry small volume sample dispersion
Dispersion Modules
Combine with Main Device
Volume	600mL (dispersion medium)	8mL(dispersionmedium)	80mL(dispersionmedium)
Automation	Full-automated	Semi-automated	Semi-automated	Full automated	Full automated

Application Notes

Overview

Features

1）FOURIER AND REVERSE FOURIER OPTICAL SYSTEM

The Bettersizer 2600 is superior in the combination of Fourier and inverse Fourier design. This smart design allows, on the one hand, the detection of stray light in a very wide angular range from 0.016° to 165°. On the other hand, in contrast to the inverse Fourier design, the particles do not have to lie on one plane – the simultaneously accurate measurement of small and large particles is therefore achieved.

Features of combination of Fourier and inverse Fourier design

Spherical detector array: Forward, lateral and backward detectors in 92 pieces in total;

Super large Fourier lens;

Small footprint: Compact design to save space

2）INTUITIVE AND POWERFUL SOFTWARE

Intuitive operation and orderly user interface

Real-time mode for determining the optimal measurement conditions

Fully automatic measurement routine

Automatic cleaning routine

Automatic data backup and highly customizable reports

Direct conversion according to Fraunhofer and Mie evaluation models

Switch between wet and dry dispersion modules with one click

3）WET DISPERSION

BT-802 is designed for particle size measurement with water as the medium.

BT-802 is made up of ABS shell. The components of it include centrifugal pump, peristaltic pump, ultrasonic disperser, pinch valve, control circuit, etc. The stirring speed is adjustable from 500 - 2500 rpm. Built-in ultrasonic system (50 W) ensures stable dispersion of samples.

BT-80N is designed for particle size measurements with organic solvents as the media. BT-80N is suitable for common organic solvents, for example:

BT-80N is made up of stainlesssteel shell. The components of it include centrifugal pump, ultrasonic disperser, PTFE pipeline, sintered-quartz sample cell, control circuit, etc.

Wet Small Volume Dispersion Module is designed for valuable or small-volume sample measurements, where the medium is solvent or water. The module consists of ABS shell, stirring motor, cuvette (8 ml), stirrer, etc.

Maximum volume in 8 mL with samples mass in 0.005 - 0.1 g.

Suitable for samples dispersed in water or organic phase.

4）DRY DISPERSION

BT-902 is suitable for dry powders particle size measurements. The gas used can be compressed air, nitrogen or other noble gases.

BT-902 is made up of electromagnetic vibration feeder, venturi pipe, gas circuit, electric circuit, pressure sensor, etc.

BT-903 is designed for particle size measurements of valuable and small amount dry powders with a minimum samples volume of 20 mg.

BT-903 is composed of venturi pipe, gas circuit, electric circuit, samples tube, etc.

5）APPLICATIONS OF BETTERSIZER 2600 PARTICLE SIZE ANALYSER

Performance

Resolution and sensitivity

The resolution and sensitivity of Bettersizer 2600 laser granulometryas verified as below: sample A was gradually added to sample B, the graphs change correspondingly.

Sample A < Sample B

Sample A = Sample B

Sample A > Sample B

SOP

Standard Operating Procedure (SOP)

SOP settings include water intake, bubble removal, background and obscuration measurement, testing, cleaning, and result saving and printing.

Advantages

The Bettersizer 2600 offers an easy solution for standardized and automatic testing.

It ensures the measurement results operator-independent, making the results more objective and reliable.

Technology

Specification

Bettersizer2600
Parameters measured	Materials
Particle size distribution	Suspensions, emulsions, dry powders
General
Principle	Laser light scattering
Analysis	Mie and Fraunhofer scattering
Typical measurement time	Less than 10 seconds
Measurement performance
Measuring range
Accuracy error	≤ 0.5% *
Repeatability	≤ 0.5% *
Reproducibility	≤ 0.5% *
Number of size classes	100 (user adjustable)
Feeding mode	Automatic circulation or micro cuvette (wet) Gas transportation (dry)
Special functions	SOP settings, refractive index measurement, sample ratio calculation
Main device
Optical system	Combined Fourier and inverse Fourier & Tilted sample cell
Laser	High-power optical fiber laser (10 mW / 635 nm)
Detector	92 detectors (forward, lateral and backward arrangements)
Measuring angle
Wet dispersion module
Measurement method	One-click operation (automated measurement, cleaning, saving, printing, etc.)
Dispersion medium	Water or organic solvents (sample dependent)
Circulation speed	500-2500 r/min
Circulation flow	3000 – 8000 ml/min
Ultrasonication	Dry burning prevention，50 W
Dry dispersion module
Dispersion medium	Air/ Nitrogen/Noble gas
Air pressure
Gas flow	400 – 6000 L/min
Software
Conformity	21 CFR Part 11, ISO 13320, USP <429>, CE
Reports	Customizable reporting
System parameters
Dimensions (L x W x H)
Weight	23 kg
Supply voltage	100/240V, 50/60 Hz
Computer configuration (recommended)
Computer interface	At least one high speed USB 2.0 or USB 3.0 port required
Operating system	Windows 7 (32 bit and 64 bit) or higher
Hardware specification	Intel Core i5 Processor, 4GB RAM, 250GB HD, Wide screen monitor
*Sample and sample preparation dependent

At Bettersize, our mission is to provide best-in-class particle sizing and characterization instruments, comprehensive solutions and exceptional customer services. We provide particle measuring services, particle size instrumentand etc. Want to know particle sizer priceor more? Please contact us.

Другие товары поставщика

	BeVision D2	Dynamic Image Analysis Particle Size for Dry Measurement The BeVision D2 provides an efficient solution to the size and shape analysis of dry, hig...
	Bettersizer 2600	Laser Particle Size Analyzer(Dry & Wet Dispersions) The integrated and robust laser particle size analyzer, Bettersizer 2600, can deliver reli...
	Bettersizer 2600	Laser Particle Size Analyzer (Dry & Wet Dispersions) The Bettersizer 2600 utilizes this laser diffraction technology. There are 92 photoelectr...
	HFlow 1	We are Bettersize,a professional particle size analyzer instrumentsupplier, providing particle size measurement units, andpowder flowbility tester...
	Bettersizer ST	Laser Particle Size Analyzer, Laser Granulometry Bettersizer ST laser scattering particle size distribution analyzerincludes the patented Dual Lens...

Все товары поставщика

Похожие товары

	flat die wood pellet mill	Продавец: Jiangsu Kingwood Industrial Co., Ltd.	前庭过程生物质颗粒中的冲击变化 木质素结构生物质 Lignum est una e multis rudibus materiis commter adhibitis in globulos...
	TrusFIL Dental Composite Restorative	Продавец: Shandong Huge Dental Material Corporation	TrusFIL Dental CompositesRestorative Provides a series of high-strength and multi-color composit...
	Traditional Heat Curing	Продавец: Shandong Huge Dental Material Corporation	Traditional Heat Curing For making denture bases, HUGE offers a series of Denture Base Polymers ...
	TopCEM-Veneer Light Cure Veneer Cement	Продавец: Shandong Huge Dental Material Corporation	TopCEM-Veneer Light Cure Veneer Cement Meet diverse needs with impressive esthetic results and g...
	TopCEM Try-in Veneer Try-in Gel	Продавец: Shandong Huge Dental Material Corporation	TopCEM Try in Paste for VeneersTry-in Gel Used to evaluate the shade and the matching of the res...