ZC3-A Concrete Resiliometer
ZC3-A Concrete Resiliometer is used for detecting the concrete compressive strength within the range of 10-60Mpa Technical parameter： 1.Length of pointer: 20.0±0.2(mm) 2.Friction force of pointer: 0.65±0.15(N) 3.Spherical radius of bounce rod end: 25±1.0(mm) 4.Stiffness of bounce tension spring: 785.0±40.0(N/m) 5.Decoupling position of bounce hammer: “100” on scale line 6.Working length of bounce tension spring: 61.5.0±0.3(mm) 7.Impact length of bounce hammer: 75±0.3 8.Take off position of bounce hammer: “0” on graduated scale 9.Fixed value of steel anvil: 80±2
We are the leading manufacturer & Supplier of superior Quality Digital Concrete Test Hammer. Concrete Test Hammer is designed specifically for the non-destructive testing of concrete structures. This method has considerable advantages over conventional methods of assessing the compressive strength of concrete in that large areas can be tested in a very short time at a very low cost .
Other supplier products
|
|
SY-2 Concrete Bleeding Meter |
SY-2 Concrete Bleeding Meter Concrete Pressure Bleeding Tester
It is especially for testing bleeding volume of pumpingconcrete instrument under a ... |
|
|
Electric soil relative density meter |
Electric soil relative density meterApplication: suitable for no cohesion of soil particle diameter less than 5 mm, and the particle size 2-5 mm sa... |
|
|
three Gang Mould For Prisms |
three gang moulds three Gang Mould For Prisms Cement Steel 40mm Three Gang Cube Mould, for prisms 40 x 40 x 160mm is made of steel, base is made o... |
|
|
Vebe Consistometer for Fresh Concrete Mixture |
Vebe Consistometer for Fresh Concrete MixtureMainly used for the determination of dry concrete with the aggregate diameter not greater than 40mm an... |
|
|
marshall electrical striking instrument(dual purpose) |
MDJ-IIC marshall electrical striking instrument(dual purpose) is used for sample molding during the experiment process of asphalt with mixing mater... |
All supplier products
Same products
