MPS-6 soil water potential temperature sensor
The MPS-6 sensor is composed of a humidity sensor and a porous material with a known moisture release curve. When the porous material reaches the moisture balance with the surrounding soil, the humidity sensor measures the moisture content of the porous material and converts the moisture content into a moisture release curve Water potential
Technical Parameters
MPS-6
Technical Parameters
Soil water potential
Measuring range
-9 kPa ~ -100,000 kPa
measurement accuracy
±(10% + 2 kPa)@ -9 kPa ~ -100 kPa (see the parameter section of the manual below -100 kPa)
Resolution
0.1 kPa
Soil temperature
Measuring range
-40 ~ 60°C
measurement accuracy
±1°C
Resolution
0.1°C
Sensor parameters
Balance time
10 min. to 1 hr. related to soil water potential
Measuring speed
150ms
sensor type
Frequency domain with calibrated ceramic plate; thermistor
output method
RS232 (TTL) with 3.6 volt levels or SDI-12 communication protocol
powered by
3.6-15 VDC, wait state 0.03 mA, maximum value 10 mA during 150 ms measurement state
Cable length
5m, other lengths can be customized
working environment
-40 ~ 60°C (Water potential measurement below 0°C may not be accurate.)
size
9.6 cm (L) × 3.5 cm (W) × 1.5 cm (D)
Origin: United States
Other supplier products
|
|
QT-RWC Root Washing System |
Product description:
The system follows the design of the Australian Commonwealth Scientific and Industrial Research Organization (CSIRO). Root wa... |
|
|
PONSEL CONDUCTIVITY conductivity sensor |
The C4E sensor uses four-electrode technology to accurately measure conductivity. The C4E sensor stores calibration data and historical data, allow... |
|
|
QT-TQ0401 PR2 probe installation tool kit |
Product description:QT-TQ0401 PR2 probe installation tool kit can apply to the installation of PR2 soil moisture profile probe.
Featur... |
|
|
CS526 pH sensor |
Campbell Scientific Inc.'s newly launched CS526 pH meter uses advanced field-effect transistor technology (Ion-sensitive field-effect transistor, I... |
|
|
SO-421 soil oxygen sensor |
用途：SO-421的响应时间快，为14秒，专为实验室应用而设计。它配有一个用于校正温度变化的热敏电阻温度传感器和一个电阻加热器，可将膜的温度提高到环境温度以上约2度，以防止聚四氟乙烯膜上发生冷凝并阻挡传感器的扩散路径。典型应用包括在实验室实验中测量O 2，监测室内环境中的气态O 2以进行气候控... |
All supplier products
Same products
