Cylindrical Plug Valve
The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylindric plug valve is generally sealed in four ways, namely, sealant, valve plug expansion, O-ring, eccentric plug wedges into valve seat.
Cylindrical plug valvewith a Teflon sleeve and plug seal in the valve body, which is pressed into the valve body with a compression nut, and the expansion force of the Teflon sleeve is used to seal.
The use of cylindrical plug valves depends to some extent on the seal between the plug and the valve body. Generally cylindrical plug valves often use four sealing methods, namely, using a sealant, using a plug expansion, using a 0-ring seal, and using an eccentric plug wedge seat seal. The sealing of the cylindrical lubrication plug valve is achieved by the sealant between the valve plug and the valve body. The sealant is injected into the sealing surface through the valve plug rod by bolts or injection guns, so when the valve is in use, it can effectively compensate for the lack of sealing by injecting a supplemental sealant.
Lubricated plug valves are particularly suitable for abrasive media because the sealing faces are protected from contact with the flowing medium in the fully open position. However, lubricated plug valves are not suitable for throttling because the sealant is flushed from the exposed seal surface during throttling so that the seal of the seat is restored each time the valve is closed.
The disadvantage of this valve is that the addition of the sealant often requires manual work. The use of automatic injection can overcome this disadvantage, but the cost of adding equipment needs to be increased. Once the valve is cleaned or repaired due to lack of maintenance or due to improper selection of sealant, or crystallization between the sealing faces and the valve plug not rotating in the valve body.
Cylindrical plug valve with a Teflon sleeve and plug seal in the valve body, which is pressed into the valve body with a compression nut, and the expansion force of the Teflon sleeve is used to seal .
Technical Specification of Cylindrical Plug Valve:
Nominal Bore: 1"~3"
Working Pressure : 2000psi ~ 15000psi
Temperature Level: –75° F ~ +250° F
Body Material: AA、BB、CC、DD、EE、FF、HH
Specification Level: PSL1~PSL3G
Performance Level: PR1~PR2
Saigao Groupspecializing in design, research and development, processing and manufacturing, sales and export of machinery equipment, with leading products comprising various kind of mud pumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds of wellhead equipment.
Send product request
Other supplier products
 |
BW1200/7 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump | BW1200/7 slurry pump is horizontal double cylinder reciprocating double action piston pump. The power has electric driving and diesel driving. It ... |
 |
Lifting-releasing and Circulating Overshot | Lifting-releasing and circulating overshotis a fishing tool used to retrieve the fractured tubing and drill string in the casing. If the drill stri... |
 |
Lifting Cap | Lifting capis a special tool for lifting the drilling tools in petroleum, natural gas, drilling engineering and geographical exploration. Technica... |
 |
BW160/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump | BW series mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, fou... |
 |
Lifting Sub | Lifting Subis a special above ground tool for lifting drilling tools in oil and gas industry and geologic exploration. It resembles a pup joint, an... |
Same products
 |
Casting Hot Fusible Film | Seller: Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd | Materials:PA,PO,EVA,PES,HDPE Thickness:0.03-0.4 mm Width:6-1500 mm Melt point:85-140℃ |
 |
MULTI-STAGE SELF-PRIMING PUMP HMC | Seller: Edwin Industrial Co., Limited | Applications For water supply from wells or reservoirs For domestic use, for civil and industrial... |
 |
ISHING TOOLS | Seller: SHANDONG SAIGAO GROUP CORPORATION | The fishing tool is the most widely used tool for overhauling oil and water wells. There are ma... |
 |
Fishing Magnet | Seller: SHANDONG SAIGAO GROUP CORPORATION | Fishing Magnet is a junk retrieval tool designed to retrieve small metal, odd-shaped objects suc... |
 |
F500 Single-acting Mud Pump | Seller: SHANDONG SAIGAO GROUP CORPORATION | F500 single-acting drilling rig mud pump equipment has two surfaces which can bear high strength... |
