SAND BLASTING ROOM

 

The big irregular workpieces blasting and painting job has been widely completed by sand blasting rooms and painting rooms, cause of this of kind parts have all kinds of shape, it is very hard to arrangement the blasting turbines to automatically blast cleaning the big workpieces at all angles. it will be a big waste of electricity and blasting media.

 

Different shape of workpieces have different blasting angles, the automatically wheel blasting machines has not yet reached to the automatic level that blast cleaning different shape workpieces at a different angle.

Another difficult work is the transportation of different workpieces at a different weight, it will be a big cost waste of transportation system if we designed the whole system according to the biggest workpiece.

Take all these uncertain factors into consideration, the blast rooms and paint rooms are the best choices for the end-user.

The blast booth and paint booth can be arranged in parallel or serial, it depends on the customer' shop actual conditions to design, or according to the customer' workpiece moving direction and sequence.

 

Our company are blast booth manufacturers and we have sandblasting booth for sale.

 

Sand blast cleaning room components

Blasting body

 

Sandblasting system

 

Abrasive reclaim system

 

Dust collector system

 

Workpiece conveying system

 

Electric control system

 

Lighting system

 

QINGGONG Blast abrasive media reclaim floors are a critical component of the abrasive blasting process. A highly efficient shot blasting room will save your operation time and labor expenses. This adds to your business’s bottom line. An effective blast media reclaim system reduces costs by allowing for recycling of your abrasive media materials. Re-use of abrasive media reduces material purchase expenses as well as cutting of material disposal costs. As an added benefit, abrasive media reclaim systems allow for automation of blast media recovery, saving additional man-hours. An abrasive media reclaim system from QINGGONG will provide your business with maximum ROI from your abrasive blast system. QINGGONG offers a variety of reclaim floor designs and room configurations. We design blast room facilities uniquely tailored to meet the economic and production concerns of our customers.

 

Partial Reclaim System

sweep-chute floor The sweep-chute floor delivers the economic and environmental benefits of media recycling at a modest cost.

Single Screw or Scraper Partial Reclaim System

 

The most economical floor design available. The system contains screw conveyor or crapper conveyor, heavy-duty screw belt and bucket elevator,air-wash separator, perforated plate rotary drum separator and oversized abrasive storage hopper with a caged man ladder and handrail. This can be expanded to an "H","U", or full floor reclaim system and is best suited for low to medium production levels.

 

“H”-Shaped Partial Reclaim System

Adds two longitudinal conveyors along each sidewall of the blast room allowing the abrasive delivered from the blasting nozzle, which is either blown or rebounded off the workpiece, to strike the side walls and fall into the conveyors, automatically reclaiming approximately 60-90 percent of the blast media. The reclaiming abrasive on the floor is pushed into the screw or scraper conveyors assemblies at the end of the work shift. The “H” shaped floor design is typically used in a “flow-through” room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production.

 

“U”-Shape Partial Reclaim System

Adds two longitudinal screw or scraper conveyors assemblies along each wall of the blast room and positions the cross screw or scraper conveyors along the back wall of the blast room. This allows the abrasive delivered from blasting nozzle, which is either blown or rebounded off the workpiece, to strike the sidewalls and back wall of the blast room and fall into the reclaim system, A "U"-shaped floor design will automatically reclaim 60-90 percent of the blast media. The remaining abrasive on the floor is pushed into the metered shed plate screw assemblies at the end of the work shift, The "U"-shaped floor design is typically used in an "in-out" room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production

 

A major benefit of this type of system is that it only requires a shallow concrete foundation. This can create substantial savings for the customer in comparison to other types of recovery systems. It also avoids the issue created by digging foundations in an area that have high water table levels. The full-floor reclaim design requires that the material handling of the workpiece be intricately designed into the configuration of the room. Material handling of the workpiece includes a work car/track system, an overhead monorail crane, an overhead bridge crane or guide rail work cars, heavy-duty floor grating and support steel sized to allow a forklift to drive onto the reclaimed floor. This design can be used with any room configuration and is best.

 

As one of the most professional shot blasting equipment manufacturers in China, QINGGONG MACHINERY’s activity is the design, manufacture, sales of automatic shot blasting machine, sandblasting room and punching machine and over more than 40 years of experience. RFQ today!




Send product request

To: QINGDAO QINGGONG SETH MACHINERY CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

BARREL TYPE SHOT BLASTING MACHINE
BARREL TYPE SHOT BLASTING MACHINE The Barrel Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements.   The Barre...
H BEAM SHOT BLASTING MACHINE
H BEAM SHOT BLASTING MACHINE H beams shot blasting is the most efficient and the most effective process to remove all forms of rust and corrosion materials from h beams prior t...
ABRASIVE
ABRASIVE QINGGONG MACHINERY can provide you with abrasive blasting service & supplies. Best abrasive for sandblasting Uniform particle size, good cleani...
HANGER TYPE SHOT BLASTING MACHINE
HANGER TYPE SHOT BLASTING MACHINE Hanger type shot blasting machine is the most flexible and versatile shot blasting machine. It comes in two options the single hook I type shot bla...
FLOOR SHOT BLASTER
FLOOR SHOT BLASTER We have floor shot blaster for sale!   Floor shot blaster is a kind of   floor blasting equipment for concrete floors, steel ...
All supplier products

Same products

Pickaxe
Pickaxe Seller: Pensla Impex To keep in mind the diverse requirements of our vaulable custmers,we offer superior quality Picka...
Garden Rake Twisted Type
Garden Rake Twisted Type Seller: Pensla Impex We are manufacturer & exporter of Garden Rake Twisted Type from India.The  available siz...
Garden Rake Plain Type
Garden Rake Plain Type Seller: Pensla Impex We presents an exclusive range of Garden Rakes with various specifications.Plain type garden rake...
Stainless Steel Capillary Tubes
Stainless Steel Capillary Tubes Seller: WENZHOU HUASHANG STEEL CO.,LTD Product description Stainless Steel Capillary Tube Description: Whether you need to exchange devi...
Hexagon Steel Tubing
Hexagon Steel Tubing Seller: WENZHOU HUASHANG STEEL CO.,LTD Product description Hexagon steel tube is the general name of all section shape of steel tube exc...