SAND BLASTING ROOM
The big irregular workpieces blasting and painting job has been widely completed by sand blasting rooms and painting rooms, cause of this of kind parts have all kinds of shape, it is very hard to arrangement the blasting turbines to automatically blast cleaning the big workpieces at all angles. it will be a big waste of electricity and blasting media.
Different shape of workpieces have different blasting angles, the automatically wheel blasting machines has not yet reached to the automatic level that blast cleaning different shape workpieces at a different angle.
Another difficult work is the transportation of different workpieces at a different weight, it will be a big cost waste of transportation system if we designed the whole system according to the biggest workpiece.
Take all these uncertain factors into consideration, the blast rooms and paint rooms are the best choices for the end-user.
The blast booth and paint booth can be arranged in parallel or serial, it depends on the customer' shop actual conditions to design, or according to the customer' workpiece moving direction and sequence.
Our company are blast booth manufacturers and we have sandblasting booth for sale.
Sandblast cleaning roomcomponents
Blasting body
Sandblasting system
Abrasive reclaim system
Dust collector system
Workpiece conveying system
Electric control system
Lighting system
QINGGONG Blast abrasive media reclaim floors are a critical component of the abrasive blasting process. A highly efficient shot blasting roomwill save your operation time and labor expenses. This adds to your business’s bottom line. An effective blast media reclaim system reduces costs by allowing for recycling of your abrasive media materials. Re-use of abrasive media reduces material purchase expenses as well as cutting of material disposal costs. As an added benefit, abrasive media reclaim systems allow for automation of blast media recovery, saving additional man-hours. An abrasive media reclaim system from QINGGONG will provide your business with maximum ROI from your abrasive blast system. QINGGONG offers a variety of reclaim floor designs and room configurations. We design blast room facilities uniquely tailored to meet the economic and production concerns of our customers.
Partial Reclaim System
sweep-chute floor The sweep-chute floor delivers the economic and environmental benefits of media recycling at a modest cost.
Single Screw or Scraper Partial Reclaim System
The most economical floor design available. The system contains screw conveyor or crapper conveyor, heavy-duty screw belt and bucket elevator,air-wash separator, perforated plate rotary drum separator and oversized abrasive storage hopper with a caged man ladder and handrail. This can be expanded to an "H","U", or full floor reclaim system and is best suited for low to medium production levels.
“H”-Shaped Partial Reclaim System
Adds two longitudinal conveyors along each sidewall of the blast room allowing the abrasive delivered from the blasting nozzle, which is either blown or rebounded off the workpiece, to strike the side walls and fall into the conveyors, automatically reclaiming approximately 60-90 percent of the blast media. The reclaiming abrasive on the floor is pushed into the screw or scraper conveyors assemblies at the end of the work shift. The “H” shaped floor design is typically used in a “flow-through” room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production.
“U”-Shape Partial Reclaim System
Adds two longitudinal screw or scraper conveyors assemblies along each wall of the blast room and positions the cross screw or scraper conveyors along the back wall of the blast room. This allows the abrasive delivered from blasting nozzle, which is either blown or rebounded off the workpiece, to strike the sidewalls and back wall of the blast room and fall into the reclaim system, A "U"-shaped floor design will automatically reclaim 60-90 percent of the blast media. The remaining abrasive on the floor is pushed into the metered shed plate screw assemblies at the end of the work shift, The "U"-shaped floor design is typically used in an "in-out" room configuration where heavy workpieces and/or material handling devices can drive into the room. This is best suited for medium to high production
A major benefit of this type of system is that it only requires a shallow concrete foundation. This can create substantial savings for the customer in comparison to other types of recovery systems. It also avoids the issue created by digging foundations in an area that have high water table levels. The full-floor reclaim design requires that the material handling of the workpiece be intricately designed into the configuration of the room. Material handling of the workpiece includes a work car/track system, an overhead monorail crane, an overhead bridge crane or guide rail work cars, heavy-duty floor grating and support steel sized to allow a forklift to drive onto the reclaimed floor. This design can be used with any room configuration and is best.
As one of the most professional shot blasting equipment manufacturers in China, QINGGONG MACHINERY’s activity is the design, manufacture, sales of automatic shot blasting machine, sandblasting room and punching machine and over more than 40 years of experience. RFQ today!
在线联系供应商
Other supplier products
 |
TUNNEL TYPE SHOT BLASTING MACHINE | Tunnel type shot blasting machineis a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type sho... |
 |
FLOOR SHOT BLASTER | Floor shot blaster is a kind of shot blasting machine for concrete floors, steel plates. The floor shot blaster can clean up the floatation and im... |
 |
SHOT PEENING MACHINE Free Quote | Shot peening machine is a process specifically designed to enhance the fatigue strength of components which are subject to high alternating stress.... |
 |
ANCHOR CHAIN SHOT BLASTING MACHINE | The working principle for shot of anchor chainmachine is mainly by numerous high speed abrasive flow projection to the anchor chain surface, which ... |
 |
HANGER TYPE SHOT BLASTING MACHINE | Hanger type shot blasting machine is the most flexible and versatile shot blasting machine. It comes in two options the single hook I type shot bla... |
Same products
 |
Floral Garden Tools Set | 卖方: Dongyang Guorui Industry And Trade Co., Ltd. | Investing in a floral garden tools set not only enhances your gardening experience but also add... |
 |
希腊-小型气相液氮储存罐-液氮容器 | 卖方: 河南天之道生物科技有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
Common Rail FuCommon Rail Fuel Injector Nozzle L500PBCel Injector Nozzle L500PBC | 卖方: 738347 | Common Rail Fuel Injector Nozzle L500PBC 0 445 110 189 Injector Valve Set 0 445 110 190 Injector... |
 |
匈牙利-小型气液相液氮罐-液氮容器 | 卖方: 河南天驰仪器设备有限公司 | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
 |
波兰-小型气相液氮罐-气相储存容器 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 在科技不断进步的今天，随着现代科研和医疗领域对生物样本的低温保存要求越来越高，小型气相液氮罐的出现，成为这一领域的理想选择。下面KGSQ厂家为您具体介绍一下它的优势特点。 1.气相/液相储存 小... |
