.

Ultrafine Mill

GKH1032D Ultrafine Ring Roller Millis a developed kind of grinding mill with optimized design & structure. It is mainly used in deep processing non-metallic mineral stones, hardness below seven Moh's hardness and humidity below 6%, such as calcium carbonate, kaolin, talc, barite, grammite, feldspar etc. The GK1032D mill mainly consists of the feeder, main unit, classifier, pulse collector, high-pressure blower, electrical control cabinet etc.

GKH 1032D Ultrafine Mill Technical & Structural Benefits:

Compared with the same type of ultrafine mill, GK1032D is highly featured with the lower vibration, easier maintenance, more wearable spare parts and lower operating cost.

GKH 1032D Ultrafine Mill Main Techincal Date:

Item

GKH1032D

Power(KW)

Main unit(mill)

132

Classifier

30

Fan

90

Roller layer

4

Roller QTY(pcs)

32

output size(um)

3-35

Capacity(kg/h)(for different output size)

800-5000

Weight of main unit(mill)

Theultra fine powder grinderis mainly used for crushing equipment for metallurgy, building materials, chemical industry, mining and other mineral materials.

The grinding range of the ultrafine mill is a variety of non flammable and explosive mineral materials, such as quartz, feldspar, porcelain clay, clay, bentonite, calcite, barite, fluorite, ball clay, white mud, gypsum and so on, the Moh's hardness of which is below 7 level and the humidity of which is below 6%. The size range of the finished product by the mill is about 325 mesh -1800 mesh (the size can be adjusted according to different requirements).

The Characteristics of the Ultrafine Mill

The noise and the vibration are small;

The pressure is heavy and the fine powder is much;

The attrition of the grinding ring and grinding roller are both even. They have long service life, which is 3-5 times than that of the ordinary Raymond mill;

It is suitable for processing hard material;

The iron content in the micro powder is low;

It can be operated continuously without affecting the oil injection in the grinding roller bearing house of the mill;

It has small power consumption, high efficiency, and easy installation and maintenance;

There is scraper feeding in the mill, so the production efficiency is greatly improved.

The Application ranges of the Ultrafine Mill

Centrifugal ultrafine mill is mainly suitable for processing the barite, calcite, limestone, kaolin, bentonite, marble, gypsum, refractory material, quartz stone, glass, ceramics and others minerals of high fine powder, the hardness of which is less than 9.3 level and the humidity of which is less than 6%. The grain size is about 80mesh -1500 mesh (the size can be adjusted according to different requirements).

The Technical Advantage of the Ultrafine Mill

The utilization rate of wear materials is high, which is four times the service life of Raymond mill;

The processing of fine sand is more effective than other mills;

It is a kind of high-efficiency equipment for power plant desulphurization;

It can be used to grind before ball milling, the milling efficiency can be increased by 50%;

It is mainly used for all kinds of brittle materials that can be crushed, and the hardness is less than that of Mori's hardness 9 level.

The Comprehensive Characteristics of the Ultrafine Mill

high efficiency. Under the circumstance of the same product size, the output is 40% higher than that of other mills;

The utilization rate of the vulnerable parts is high. When the material and finished product have the same particle size, the service life of the wearing parts is longer than that of other mining machinery;

High safety and reliability. The mill is designed rigorously, and there is no problem of screw loosening and destroying the ultra fine powder grinding machine;

Clean and environmental. The use of pulse dust remover and muffler reduces dust pollution and noise. So it achieves national environmental standards.



Send product request

To: Guilin Mining Machinery Co., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Ball Mill
Ball Mill The Handling Materials and Main Types of Ball Mill: Ball mill is a key equipment for grinding materials, widely used in powder-making production li...
GK2150 Raymond Mill
GK2150 Raymond Mill GK2150 Raymond Mill Technical & Structural Benefits: This High Pressure Suspension Millhas high output, high-efficiency, and energy saving. It ...
Ultrafine Mill
Ultrafine Mill GKH1032D Ultrafine Ring Roller Mill is a developed kind of grinding mill with optimized design & structure. It is mainly used in deep processin...
Raymond Mill
Raymond Mill As national powder R&D center, GUIKUANG has made much efforts and contributions for the development of powder industry more than 40 years. Raym...
Vertical Grinding Mills
Vertical Grinding Mills GKLM series vertical grinding millis one advanced powder making mill through our engineer research and experience and bringing in advanced technolo...
All supplier products

Same products

RONGPENG High Quality R803 HVLP 1.0mm Nozzle Spray Gun Pro Painting Gun Water Based Air Spray Gun Airbrush Pneumatic Tool
RONGPENG High Quality R803 HVLP 1.0mm Nozzle Spray Gun Pro Painting Gun Water Based Air Spray Gun Airbrush Pneumatic Tool Seller: 773794 特征: • 铝锻造枪身,带有精密加工的气帽组。• 不锈钢针和喷嘴适用于多种涂层。• 更好的表面质量,实现一尘不染的光洁度。• 确保出色的涂装效果。&bul...
Brass CNC Lathing Parts
Brass CNC Lathing Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd cnc milling brass / milling brass cnc router / cnc router brass cnc machine for brass / brass die...
Anodized Aluminum Cnc Parts, Anodizing Parts Cnc Machining, CNC Machining Parts
Anodized Aluminum Cnc Parts, Anodizing Parts Cnc Machining, CNC Machining Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd These are the machining aluminum parts, anodizing large aluminum partsrecently produced by us. It...
Alunminum CNC Lathing Parts
Alunminum CNC Lathing Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd This is the custom aluminium partsrecently produced by us. It meets the requirements of ISO9001:2...
Aluminum CNC Machining Parts
Aluminum CNC Machining Parts Seller: ShenZhen City YuanYiDa precise manufacture Co.,Ltd This is the machining aluminum partsrecently produced by us. It meets the requirements of ISO9001...