ZM-R7220A Infrared Soldering Station
ZM-R7220A infrared SMD rework station is an intelligent infrared soldering stationwith real-time temperature monitoring, optical alignment system, rapid heating, and cooling. As an ir soldering station manufacturer, Zhuomao promises to provide high-quality infrared BGA reworkmachines. Significantly, Zhuomao's infrared soldering station price is reasonable. Plus, Seamark ZM-R7220A ir rework station is also called zm r6200cin the past.
Functions of R7220A Infrared Soldering Station (ZM R6200)
01 Real-time Temperature Monitoring
Real-time temperature display, with automatic curve analysis function.
02 Optical Alignment System
High-definition CCD (2m pixels) digital imaging, automatic optical zoom system, manual control and laser red-dot alignment.
03 Rapid heating and cooling
The IR preheating zone is heated by a medium wave ceramic infrared heating plate, a multi-functional movable PCB fixing bracket, and a BGA bottom support frame. Laminar integrated cooling fan.
As one of the top infrared soldering station suppliers in China, Seamark ZM is famous for its rich technical force, complete detection means, reliable product quality, and full service. If you want to know the BGA repair machine and to get a perfect infrared soldering station price for your factory, please contact Seamark ZM first.
Specification Of R7220A IR Infrared BGA Rework Station (ZM R6200C)
|
Power Supply |
AC220V±10% 50/60HZ |
|
Power |
|
|
PCB Size |
412*370mm(Max);6*6mm(Min) |
|
BGA Chip Size |
60*60mm(Max);2*2mm(Min) |
|
IR Heater Size |
285*375mm |
|
Temperature Sensor |
1 pcs |
|
Operation Method |
7" HD touchscreen |
|
Control System |
Autonomous heating control system V2（software copyright） |
|
Display System |
15" SD industrial display (720P front screen) |
|
Alignment System |
2 Million Pixel SD digital imaging system, automatic optical zoom with laser red-dot indicator |
|
Vacuum Adsorption |
Automatic |
|
Alignment Accuracy |
±0.02mm |
|
Temperature Control |
K-type thermocouple closed-loop control with accuracy up to ±3℃ |
|
Feeding Device |
No |
|
Positioning |
V-groove with universal fixture |
|
Dimensions |
L685*W633*H850mm |
|
Weight |
76KG |
Difference Between A Hot Air Rework Station And An IR Infrared BGA Rework Station
The main difference between a hot air rework station and an IR BGA Rework Station is the way they heat the board. A hot air rework station uses heated air to transfer heat from the tool-to-board interface and into the solder balls, whereas an IR BGA Rework Station uses infrared light to heat up just enough of each ball so that it melts.
The next important difference is how they control temperature: Hot Air rework stations use PID temperature control, but IR BGA Rework Stations use proportional pressure modulation (PPM). PPM is more precise than PID because it can monitor changes in pressure within milliseconds. This means that when applying flux to a board or when reflowing solder balls on a board, you can rapidly respond by adjusting your PPM settings as necessary. With PID, this would take about 20 seconds per change due to slow response times in most systems.
Another key difference lies in airflow control systems; hot air has no need for specialized airflow since there's no need for cooling during reflow since all of that happens outside of the oven chamber using an external fan which blows across all areas equally regardless if they are close or far away from each other.
If you have needs to buy bga x ray inspection equipment, please contact us.
Send product request
Other supplier products
 |
X-Ray SMD Component Counting Equipment | Microfocus X-ray inspection is widely used in LED/automobile/aerospace/EMS etc field and become a necessity for modern PCBA inspection. The X-ra... |
 |
X5600 Offline X-ray Inspection Machine | X5600is a small precise microfocus X-Ray inspection equipment, suitable for R&D enterprises, laboratories, quality inspection rooms, etc. It is... |
 |
Offline X-Ray Inspection Machine | Seamark's 2D industrial x ray inspection equipmentadopts a closed microfocus X-ray tube with voltage 90KV, 110KV,130KV, which meet different produc... |
 |
Offline Reel Counter | The offline counting machine is a micro-focus X-Ray automatic counting machine. This China inline x ray machineuses the X-RAY perspective princi... |
 |
X-ray Inspection Machine for Stacking Battery | Seamark stacking battery industrial digital x ray inspection systemsare suitable for the inspection of stacking (blade) process-type cells in the l... |
Same products
 |
DM-16BF DM-18BF New cover Electric Sprayer | Seller: Zhejiang Huaqi Information Technology Co., LTD | The Electric Knapsack Sprayer is a game-changer in the field of agricultural pest control. Engine... |
 |
Simple Round Breeding Cage | Seller: Zhejiang Huaqi Information Technology Co., LTD | The Simple Round Breeding Cage features a durable and lightweight construction, making it suitabl... |
 |
Syria-liquid nitrogen container for cell storage-liquid nitrogen level gauge | Seller: Henan Tianzhidao Biological Technology Co., Ltd | Precise experimental conditions and safe sample storage are key elements for the smooth developme... |
 |
Italy-liquid nitrogen cell storage tank-liquid nitrogen tank level indicator | Seller: Henan Tianchi Instrument & Equipment Co., Ltd. | Precise experimental conditions and safe sample storage are key elements for the smooth developme... |
 |
Egypt-cryogenic cell storage-liquid nitrogen level monitors | Seller: Henan Tianzhidao Biological Technology Co., Ltd. | Precise experimental conditions and safe sample storage are key elements for the smooth developme... |
