Bright Annealed Tubes

Product description

Bright Annealed Tubes Description

Bright annealed stainless steel tubeis a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tubeis mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.

Bright annealed stainless steel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.

The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.

Especially for the tube with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is not possible for the regular annealing.

To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel tubing used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.

Type Of Tube: Welded tubing and Seamless Tubing

Straight Tubes Bright Annealing Advantages

Bright Annealed Tubes Sizes

welded tubing size range

OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm

Length: CUT TO LENGTH

The seamless straight tubing & bright annealed tubingsizes:

Bright Annealed Tubes Materials

Austenitic Stainless Steel:TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760Nickel Alloy Steel:N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675Bright Annealed Tubes StandardASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516Heat Treatment: Bright AnnealedNDT: Eddy Current or Hydraulic test or UT

Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel

Bright Annealed Tube Pressure Calculation Formula

Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)

Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)

Steel tube pressure P<7Mpa coefficient S=8

7< steel tube pressure P<17.5 coefficient S=6

The pipe pressure P>17.5 coefficient S=4

Other supplier products

	Equal Tee	Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a...
	Forged Flanges	We are forged flanges manufacturer, supplier and exporter for a wide range of quality industrial forged steel flangesincluding welding neck flange,...
	Tube Caps	Product description Steel tubing caps, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the ...
	Medical Tubing	Product description Medical Grade Stainless SteelTubingDescription Stainless steel medical tubes available as thin wall tubes in seamless or welded...
	Boiler Tubes	Product description Boiler Tubes Description HUASHANG has the cold draw computing device which is 70 meters long, can produce fifty-three meters ...

All supplier products

Same products

	Advanced Surge Aerator	Seller: Zhejiang Huaqi Information Technology Co., LTD	The simple and light design of Surge Aerator has the biggest advantage of power saving. Being dif...
	Compact & Economic Industrial Vacuum Cleaners	Seller: Dongguan VILLO Technology Inc.	The compact & economic small portable industrial vacuum cleanersare used for machine general ...
	Slanting Facing and Centering Machine SZ820530/SZ820550	Seller: Lecn Anhui Co., Ltd	SZ820530/SZ820550 Product Description Both ends of the one clamping are processed at the same t...
	YL-Impeller aerator (3 kw)	Seller: Zhejiang Huaqi Information Technology Co., LTD	This YL-Impeller Aerator (3 Kw) combines efficiency, durability, and adaptability to meet the div...
	Advanced Four-Impeller Paddle Wheel Aerator	Seller: Zhejiang Huaqi Information Technology Co., LTD	This Four-Impeller Paddle Wheel Aerator(chinaaerator.net/product/paddle-wheel-aerator-1/fourimpel...