RPS-L11M Radio Probe Systemc
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
|
TP200+RPDM： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±15°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
600±30（g） |
|
Trigger force in X-Y direction |
50-100（g） |
|
Radio signal receiving/sending distance |
>14m |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
|
RSI-20M |
|
|
Radio signal receiving/sending distance |
>14m |
|
Frequency of the radio signal |
|
|
Quantity of the radio channel |
16 |
|
Input voltage |
24±10% VDC |
|
Output load current |
50mA |
|
Length of the cable |
8m |
|
Length of the cable retaining tube |
2m |
|
Seal grade |
IP68 |
Application of RPS-L11M Radio Probe System
RPS-L11 is for workpiece inspection and job set-up on multi-tasking machines and lathes.
PRS-L11 often used in turning machine to measure workpiece and set datum point.
It provide automated on-machine measurement of component position and alignment. Set up faster, improve quality and reduce scrap.
Technical Characteristics of RPS-L11M Radio Probe System
The stylus connector of TP200 probe is protected by a metal cover and a rubber seal cover;
Switch on/off method of RPD/RPDM radio signal emitter: M code on/off;
Radio code signals are used to transmit information between RPD/RPDM radio signal emitter and the receiver. The time to transmit and to decode a group of signals is less than 1ms;
Globally recognised 2.4 GHz waveband – compliant with radio regulations in all major markets.
The RSI-20 receiver out put trigger、error、probe batteries low and output pulse four kinds of signals. And it's logical state can change normally closed and normally open.
The indicating lights in RSI-20 and RPDM show the working status of the probe system
For more information about touch probeand pioneer machine and tool, please feel free to contact us!
Send product request
Other supplier products
 |
Machine Probe System in CNC Turning Machine | Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p... |
 |
RPS-L11M Radio Probe System | RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software. The RPDM is a radio fre... |
 |
Problems That Should Be Paid Attention to when Calibrating the Touch Trigger Probe | touch triggerprobe is smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why th... |
 |
Manual Probe | The probe manualis suitable for various specifications of machine centers, CNC boring and milling machines, drilling-tapping machine centers, etc. ... |
 |
TP300 Cable Probe | TP300cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes and specially measuring devices. TP300 cable pro... |
Same products
 |
Advanced Surge Aerator | Seller: Zhejiang Huaqi Information Technology Co., LTD | The simple and light design of Surge Aerator has the biggest advantage of power saving. Being dif... |
 |
Compact & Economic Industrial Vacuum Cleaners | Seller: Dongguan VILLO Technology Inc. | The compact & economic small portable industrial vacuum cleanersare used for machine general ... |
 |
Slanting Facing and Centering Machine SZ820530/SZ820550 | Seller: Lecn Anhui Co., Ltd | SZ820530/SZ820550 Product Description Both ends of the one clamping are processed at the same t... |
 |
YL-Impeller aerator (3 kw) | Seller: Zhejiang Huaqi Information Technology Co., LTD | This YL-Impeller Aerator (3 Kw) combines efficiency, durability, and adaptability to meet the div... |
 |
Advanced Four-Impeller Paddle Wheel Aerator | Seller: Zhejiang Huaqi Information Technology Co., LTD | This Four-Impeller Paddle Wheel Aerator(chinaaerator.net/product/paddle-wheel-aerator-1/fourimpel... |
