RPS-L11M Radio Probe Systemc
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
|
TP200+RPDM： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±15°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
600±30（g） |
|
Trigger force in X-Y direction |
50-100（g） |
|
Radio signal receiving/sending distance |
>14m |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
|
RSI-20M |
|
|
Radio signal receiving/sending distance |
>14m |
|
Frequency of the radio signal |
|
|
Quantity of the radio channel |
16 |
|
Input voltage |
24±10% VDC |
|
Output load current |
50mA |
|
Length of the cable |
8m |
|
Length of the cable retaining tube |
2m |
|
Seal grade |
IP68 |
Application of RPS-L11M Radio Probe System
RPS-L11 is for workpiece inspection and job set-up on multi-tasking machines and lathes.
PRS-L11 often used in turning machine to measure workpiece and set datum point.
It provide automated on-machine measurement of component position and alignment. Set up faster, improve quality and reduce scrap.
Technical Characteristics of RPS-L11M Radio Probe System
The stylus connector of TP200 probe is protected by a metal cover and a rubber seal cover;
Switch on/off method of RPD/RPDM radio signal emitter: M code on/off;
Radio code signals are used to transmit information between RPD/RPDM radio signal emitter and the receiver. The time to transmit and to decode a group of signals is less than 1ms;
Globally recognised 2.4 GHz waveband – compliant with radio regulations in all major markets.
The RSI-20 receiver out put trigger、error、probe batteries low and output pulse four kinds of signals. And it's logical state can change normally closed and normally open.
The indicating lights in RSI-20 and RPDM show the working status of the probe system
For more information about touch probeand pioneer machine and tool, please feel free to contact us!
在线联系供应商
Other supplier products
 |
CNC Machine Probe System in CNC Milling Machine | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
CNC Machine Tool Setter System | Tool setter for CNC machining centers is an important operation procedure in CNC machining, and its accuracy will directly affect the processing pr... |
 |
OPS-30 Optical CNC Probe System | OPS-30 optical transmission probesystem with special cnc probe programmingcontains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and ... |
 |
PIONEER CNC MACHINE TOOL PROBE & SETTER SYSTEM & TOUCH PROBE SOFTWARE | Harbin Pioneer's product design is based on the realization of satisfying their own functions and using more ideas to carry the connotation, then p... |
 |
EP40 Electrical Probe | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
Same products
 |
Advanced Surge Aerator | 卖方: Zhejiang Huaqi Information Technology Co., LTD | The simple and light design of Surge Aerator has the biggest advantage of power saving. Being dif... |
 |
Compact & Economic Industrial Vacuum Cleaners | 卖方: Dongguan VILLO Technology Inc. | The compact & economic small portable industrial vacuum cleanersare used for machine general ... |
 |
Slanting Facing and Centering Machine SZ820530/SZ820550 | 卖方: Lecn Anhui Co., Ltd | SZ820530/SZ820550 Product Description Both ends of the one clamping are processed at the same t... |
 |
YL-Impeller aerator (3 kw) | 卖方: Zhejiang Huaqi Information Technology Co., LTD | This YL-Impeller Aerator (3 Kw) combines efficiency, durability, and adaptability to meet the div... |
 |
Advanced Four-Impeller Paddle Wheel Aerator | 卖方: Zhejiang Huaqi Information Technology Co., LTD | This Four-Impeller Paddle Wheel Aerator(chinaaerator.net/product/paddle-wheel-aerator-1/fourimpel... |
