FIBER OPTICAL CONNECTIVITY
Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we always cooperate with well-known connectivity suppliers for fiber optic connectivityassembly technology enhancement, for example, CS, SN, MDC connector for new applications.
Standard Patch Cord
Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment.
As a quality fiber optic patch cord factory, T&S provides types of custom simplex, duplex, single-mode (SM), and multi-mode (MM) fiber patch cords and fiber pigtail assemblies with various types of fiber connectors including ST, FC, SC, LC, MU, MTRJ, E2000 and so on.
Our fiber optic cable patch cord and pigtail range offer choices of any length, connector types, and either PVC or LSZH cable jacket, and all cable assemblies are composed of our top quality ceramic ferrules and fiber connectors housings which ensures stable performance at a high-quality level. Except for standard Fiber Patchcord, we supply other types of Patch cord, including Grade B patch cord, IP68 LC/SC patch cord, LC/SC loopback, outdoor Patchcord, etc. for different applications as well.
Pre-terminated Multifiber Cable
Pre-terminated multi-fiber cables consist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MTRJ, E2000 Connector types. Our polishing craft and expertise ensure excellent optical performance.
As a professional pre-terminated cable manufacturer, T&S producesmultifiber cable assemblies that are composed of top-quality ceramic ferrules and fiber connector housings. All of ourmultifiber cables are ensured witha stable performance at a high-quality level.
MTP/MPO Cable Assembly
MTP/MPO cable assembly use MPO orMTP Chinamulti-fiber connectors. MTP/MPO Fiber Patch Cord greatly saves space and is very convenient to use. Based on single ferrule MT technology, the MPO Fiber Patch Cord assemblies provide up to 72 fiber connections in a single point, reducing the physical space and labor requirement, while providing the same bandwidth capacity of a multi-fiber cable with individual fiber connector terminations per cable.
Typically with MT series like MTP/MPO fiber connectors, these MTP/MPO Patch Cord features multi-fiber connections in the same single-core fiber optic patch cord. Except for Standard MTP/MPO cable assemblies including MTP/MPO harness cable, shuffle cable, hydra cable and trunk cable, we also provide other types like IP68 MTP/MPO fiber cable, MTP/MPO loopback adapterand so on for different applications.
Fiber Optical Flexplane
Fiber optical flexplanes provide one of the highest density and versatile interconnect systems on the market today. For high fiber-count interconnects in backplanes and cross-connect systems, fiber optical flexplane provides a manageable means of fiber routing from card-to-card or shelf-to-shelf. Designed for versatility, flexplane provides high-density routing on a flexible, flame-resistant substrate. A variety of interconnects, including MTP, MT, MXC, LC, SC and the like can be terminated to connect the optical flex circuits to individual cards in a shelf. Available in any routing scheme, fiber can be routed point-to-point, in a shuffle, or in a logical pattern to meet specific requirements. Both direct and fusion-spliced terminations are available.
Fiber Optical Adapter
The optical fiber adapter connects the connectors at both ends through its internal ceramic sleeve, so as to ensure excellent connection performance between the optical fibers. In order to be fixed on various panels, the shape design can be various types based on the actual application of a variety of structures, such as “with flange/without flange“, simplex/duplex/quad/etc.
Fiber Optical Connector
The optical fiber communication connector is composed of ceramic ferrule and connector kits. different types of connector kits and ferrules are pre-assembled according to different connector types. During patchcord production, optical fiber patchcord or pigtails can be quickly produced with optical cable, and to a certain extent, the production processes of optical fiber cables is less and the efficiency is therefore improved.
Fiber Optical Attenuator
Optical fiber communication attenuator is composed of attenuation optical fiber, attenuator kits, connector kits and cables, Attenuator is used to attenuate input power on optical path to avoid signal distortion at optical receiving end due to excessive input optical power; or used for debugging optical power performance in optical communication system, calibration and correction of optical fiber instrument, and attenuation of optical fiber signal. The products are made of attenuation optical fiber doped with metal ions, and they are able to adjust the optical power to the required level.
Fiber Optical Master Cord
Fiber optical master cord and bus cord are produced by standard ferrule with high-standard connector kits via special production process. According to different application requirements, the master cord can be generally divided into two grades: bus cord and master card. The product has characteristics like low loss, good consistency, and good interchangeability, which can minimize the impact of the test system on the test results. It is widely used in product testing, instrument calibrations. Produced by T&S, a professional supplier offiber optic connectivityproducts, our master cords can be applied to various occasions.
T&S Communicationsis one of the leadingfiber optic products supplierin China, specializing in developing, manufacturing, marketing an extensive range ofoptical communications productsfrom passive to active categories for optical communications networks and data centers especially.
Send product request
Other supplier products
 |
SC/SM/PC | ID 0.125/0.126mm, concentricity 1.0um, OD 2.4990mm, this kind of standard optical ferrules with good thermal stability, high precision and reliabil... |
 |
FBG Temperature Sensor | SEN-T004 Sensor measures the temperature by utilizing the inherent feature of heat-sensitivity of FBG. All the capsulation is specially designed to... |
 |
PRE-TERMINATED MULTIFIBER CABLE | PRE-TERMINATED MULTIFIBER CABLE Pre-terminated multifiber cableconsist of optical fiber cable terminated with various types of connectors, such as ... |
 |
PLC WAFER & CHIP | As an experienced plc splitter factory, T&S offers PLC splitter wafers as well. Based on Planar Lightwave Circuit technologies, PLC splitter wa... |
 |
FIBER OPTICAL TRANSCEIVERS | As a leading fiber optical transceiver manufacturer, T&SCommunication supplies a full range with all-round categories from 10Gb/s to 100Gb/s op... |
Same products
 |
2D Optical Fiber Collimator Array | Seller: Zhongshan Meisu Technolody Co.,Ltd | Traditional optical fiber collimatoris the basic component of optical fiber communication device.... |
 |
Connecting Integrated Micro-optical System with Fibers | Seller: Zhongshan Meisu Technolody Co.,Ltd | Connecting Integrated Micro-optical System with Fibers Custom Fiber Array Units of High precisi... |
 |
SuperHandy Compact Wood Chipper - 7HP Gas Engine, Adjustable Exit Chute, up to 3" Branch Diameter (Orange) | Seller: Great Circle Machinery Crop | Description The Small but superhandy wood chipper Our super handy chipper shredder & superhan... |
 |
SuperHandy Wood Chipper Shredder Mulcher - Heavy-Duty 7HP, 3-in-1 Multi-Function | Seller: Great Circle Machinery Crop | Description This SuperHandy electric chipper shredder Mulcher is a heavy-duty 7HP, 3-in-1 multi-f... |
 |
SuperHandy Portable Electric Winch - Braided Steel Cable, 1000LBS Max Load, 48V 2Ah Battery System | Seller: Great Circle Machinery Crop | SuperHandy Portable Electric Winch - Braided Steel Cable, 1000LBS Max Load, 48V 2Ah Battery Syste... |
